How long should my handguard be for a 16 inch barrel?
How long should my handguard be for a 16 inch barrel?
15” Handguard: This covers most of the 16″ barrel and should end just prior to the threading for you muzzle device.
Is 15 inch handguard too long?
15-inches. Intended mostly for rifle-length gas systems, it’s perfectly usable on any standard length gas system. Generally, these will only be used on barrels that are 16-inches or longer and are probably the most common length for handguards.
What length handguard do I need?
The handguard should extend from the front of your upper all the way to the gas port, wherever that hits toward the end of the barrel. So, generally speaking, if you want to change to a shorter or longer handguard rail, you will need to change out your barrel and gas system accordingly.
How long is carbine handguard?
approximately 6.5 to 7 inches long
Carbine-Length Carbine gas tubes are approximately 7.5 inches long, which means the handguards are approximately 6.5 to 7 inches long.
How long are AR 15 handguards?
Guide to AR-15 Handguard Lengths, Gas Block Position, and Muzzle Device Position
| Gas System | Distance ‘A’ from Receiver to Gas Block Shoulder |
|---|---|
| Pistol | 4 1⁄4″ |
| Carbine | 7 5⁄16″ |
| Midlength | 9 5⁄16″ |
| Rifle | 12 5⁄8″ |
How long is a standard AR 15 handguard?
Most low-profile gas blocks are about 1″ long, so assuming you want the handguard to completely cover the gas block, then your handguard needs to be at least 1″ + 7 5⁄16″ = 8 5⁄16″ long. The nearest commonly-available handguard size is 9″, so you need to shop for a 9″ or longer handguard.
How long is mid-length handguard?
around 8.5 to 9 inches long
Mid-Length They give you a longer sight radius and reduce some of the wear and tear on the upper receiver. Mid-length gas tubes are approximately 9.5 inches long and require a handguard around 8.5 to 9 inches long. Choices for handguards of this length include the: UTG Free-Float Mid-Length Quad-Rail.
Should I free-float my AR-15?
My bottom line advice would be this: For a general-purpose AR-15, either for a patrol rifle or home defense, a free-floating barrel is not an immediate necessity. A quality basic rifle will perform quite well, and the standard handguard design offers more than enough accuracy potential for general duty use.
What size gas tube do I need for a 16 inch barrel?
For a 16″ barrel a mid length gas tube measuring between 11.25 – 11.75 inches should be used.
Can I put a longer handguard on a carbine?
Correct Handguard Length But if you use a low-profile gas block, it is possible to put a longer handguard on a shorter gas system – such as a carbine handguard on a pistol gas system, or a mid-length handguard on a carbine gas system.
