Why is my Dymo not working?

If the Dymo LabelWriter is already installed on your computer, but does not work with our software: Unplug the USB cable from your printer. Open the Windows Start Menu and select “Devices and Printers”, “Printers”, or “Printers and Faxes”. Right-click on the Dymo LabelWriter icon and select “Remove Device” or “Delete”.

Why is my Dymo not printing on the label?

It could also be a faulty/dirty sensor in the printer. If you press the feed button and only one label advances (as is expected), then it is most likely an incorrect setting in the DYMO Label Software (DLS) or within your third party application.

Why is the light on my Dymo blinking?

Power Status Light Flashing If the power status light is flashing, the problem could be one of the following: No labels – The label roll is out of labels or there is no label roll inserted. Always use authentic DYMO labels.

How do you reset a DYMO?

Dymo LabelWriter Wireless – Resetting the Printer to Factory Default Settings

  1. Make sure the power is turned on.
  2. Using a pointed non-metal tool, press and hold the RESET button on the back of the printer for at least five seconds.
  3. After five seconds, release the RESET button to begin the printer reset.

How do I get my DYMO printer out of error state?

To fix this problem try this:

  1. Go to Start > Devices and Printers.
  2. Right-Click on your Dymo Labelwriter and choose the “Printer properties”
  3. Select the “Ports” tab.
  4. Uncheck the the option for “Enable bidirectional support”
  5. Click “OK”

Why does my Dymo label maker keep jamming?

The LabelManager 160 / 210D / 280 labellers can give a “label Jam!” error, which can be caused by a motor stall or stuck cassette label tape. Sometimes new tapes, or tape that has been in the machine for a long while, can stick and the motor does not have enough power to turn it.

How do you fix a jammed label maker?

Remove the batteries from your label maker. Carefully grasp the tape cassette and pull it out of the device. Use a pair of plastic tweezers to gently remove any pieces of labels or foreign objects that may have jammed inside the label maker.

How do you reset a Dymo label printer?

Why is my Dymo printer printing multiple blank labels?

If the machine produces more than one blank label sheet, read on. The printing of blank labels is often caused by a dirty sensor. See, labelwriters such as these operate by using thermal printing techniques. Essentially, they scan the label paper for those chemically-treated areas that darken as heat is applied.