What is the function of IC 7476?

The JK flip flop in this 7476 IC also has a preset and clear function which allows the IC to bypass the clock and inputs and give the different outputs. 7476 is TTL based and can be operated with any TTL based device or any microcontroller.

What is JK flip flop truth table?

Truth Table: When both of the inputs of JK flip flop are set to 1 and clock input is also pulse “High” then from the SET state to a RESET state, the circuit will be toggled. The JK flip flop work as a T-type toggle flip flop when both of its inputs are set to 1. The JK flip flop is an improved clocked SR flip flop.

How many flip flops are in the 7476 IC?

7476 IC contains two independent positive pulse triggered J-K flip-flops with complementary outputs.

How many flip flops are in the 7475 IC?

4 D flip-flop
IC-7475 has 4 D flip-flop.

What does CLR mean in an IC?

CLR. This is a Clear pin, which will instantly reset all the outputs to LOW, or 0. LOAD’. The LOAD’ pin tells the chip to LOAD the data from pins A through D into outputs Qa to Qd on the next clock pulse.

What is a CD 4013 IC?

The CD4013B device consists of two identical, independent data-type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs and Q and Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter and toggle applications.

Why JK flip-flop is used?

A J-K flip-flop is nothing more than an S-R flip-flop with an added layer of feedback. This feedback selectively enables one of the two set/reset inputs so that they cannot both carry an active signal to the multivibrator circuit, thus eliminating the invalid condition.

How many flip-flops are in the 7474 IC?

The 74LS74 device contains two independent positive-edge-triggered D flip-flops with complementary outputs.

Which IC is used in JK flip-flop?

The IC used is MC74HC73A (Dual JK-type flip-flop with RESET). It is a 14 pin package which contains 2 individual JK flip-flop inside. Above is the pin diagram and the corresponding description of the pins.

How many bits can a latch store?

A latch has a feedback path, so information can be retained by the device. Therefore latches can be memory devices, and can store one bit of data for as long as the device is powered.

What is CLR in circuit?

A design layout record (DLR) or circuit layout record (CLR) is used in the telecommunication industry to describe the detailed design path of a completed circuit, including all equipment and network components from one end (often referred as A-Loc or A-end) of the circuit to the other (Z-Loc or Z-end).