What is ip route command in Cisco?

The ‘ip route’ command is a global configuration command. This command defines a static route for a specific destination network. To define a static route, this command needs the following information. Either the name of the local interface connected to the destination network or the IP address of the next-hop router.

How do I route a Cisco IP?

To enable IP routing, use the ip routing command in switch configuration mode. To disable IP routing, use the no form of this command. This command has no arguments or keywords. IP routing is disabled.

What does show ip route IOS command does?

The show ip route command is used to show the router’s routing table. This is the list of all networks that the router can reach, their metric (the router’s preference for them), and how to get there. This command can be abbreviated sh ip ro and can have parameters after it, like sh ip ro ospf for all OSPF routes.

How do I find my ip route?

To display the current state of the routing table, use the show ip route command in user EXEC or privileged EXEC mode. The show ip route command is a powerful tool to use at this point in your search. You can directly examine the routing table to determine if an entry for the host exists.

What does the route command do?

Description. The route command allows you to make manual entries into the network routing tables. The route command distinguishes between routes to hosts and routes to networks by interpreting the network address of the Destination variable, which can be specified either by symbolic name or numeric address.

What does route command do?

What is the default route command?

A default route configured by the “ip route” command is called the default static route. Some routing protocols such as RIP and EIGRP allow us to advertise the default static route. A default static route configured on other router and learned via a routing protocol is known as the dynamic default route.

How do I display IP routing table?

The -r option of netstat displays the IP routing table. On the command line, type the following command. The first column shows the destination network, the second the router through which packets are forwarded. The U flag indicates that the route is up; the G flag indicates that the route is to a gateway.