What is Fe error?

The FE error code on the LG washer display is indicating a water overflow issue. This means the WATER INLET VALVE may not be shutting off the flow of water and therefore the DRAIN PUMP is running constantly.

What is Fe on LG?

The FE error code in the LG washing machine is displayed both during the water gaining and in the rinse or washing mode of the laundry. So, with this code, the system signals that the tank of the washing machine is overfilled with water. In particular cases, it means that water has reached the maximum permissible rate.

How do I fix Fe error on my LG dishwasher?

FE – Fill Error

  1. Press the POWER button to turn the dishwasher off.
  2. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
  3. Turn the circuit breaker to the dishwasher back ON.
  4. Press the POWER button to turn the dishwasher ON, and start a new cycle.

How do I force drain my LG washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

What does F mean on LG washing machine?

The manufacturer has assigned this error or fault code to indicate that there is a problem with the amount of water entering the machine. This error code will be displayed if the machine is trying to fill with water but the flow meter doesn’t sense any flow for 30 seconds.

How do I reset my LG washer error?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do I unclog my LG Inverter Direct Drive dishwasher?

Follow these steps to unclog an LG dishwasher drain hose:

  1. Unplug the dishwasher.
  2. Remove the lower front panel.
  3. Disconnect the hose from the drain pump.
  4. If a clog is visible at either end of the hose, carefully remove it with a straightened wire hanger.

How do you reset LG dishwasher?

How to Reset LG Dishwasher

  1. Disconnect power from the dishwasher for 10 to 15 seconds. You can do this by turning OFF the circuit breaker or disconnecting the power cord.
  2. Now switch ON the LG dishwasher. If you have Turn OFF the circuit breaker, then flip it to ON.
  3. Now press Power/Start button.
  4. Start an empty cycle.

https://www.youtube.com/watch?v=tQj00r_rE0M