Is acrylic plastic easy to cut?

Acrylic sheets are easy to cut if you know what tools to use! I’ll show you how to cut acrylic or Plexiglass three different ways for the best results! Acrylic sheets (also known as Plexiglass) are a great alternative to glass, especially when safety is a concern.

How do you cut acrylic plastic without cracking it?

Tips to Avoid Cracking or Breaking Plexiglass as You Cut

  1. Keep the plastic film on. As mentioned above, plexiglass usually comes with a thin layer of plastic film intended to prevent scratches as the material travels from manufacturer to retailer to your workshop.
  2. Score deep.
  3. Use the right blade.
  4. Keep the blade cool.

How do you cut acrylic sheets for crafting?

The easiest one is by using a simple box cutter to carve a groove in the acrylic sheet. Then orientate the acrylic sheet along a table edge so that the edge and the groove line up. Finally, gently break the acrylic glass along the groove.

Can you cut acrylic sheet with utility knife?

When using a cutter or knife: Use a glass cutter or the dull side of a utility knife to score the plexiglass along the mark line five to 10 times. Flip over the sheet and score the opposite side of the piece. Line up the score line with the edge of the work space and clamp it down.

Can you drill holes in acrylic sheets?

You can drill acrylic with a normal steel drill or an HSS drill. It is important that the drill is not brand new, as the sharp cutting angle can cause the drill to bite into the sheet, causing it to tear.

What is the best tool to cut acrylic with?

A jigsaw is one preferred tool for cutting acrylic sheets. It is a small handheld tool that can cut the sheet with the straight blade by function up and down in fast motion. However, if you intend to cut acrylic into a nonlinear fashion, a jigsaw is the right option for you.

Can you cut acrylic sheets with a circular saw?

Circular saws can be used on acrylic sheets of all thicknesses. Use jigsaws with metal cutting blades of reduced depth and sharp teeth (5-6 teeth per cm) – use the finest blade you can. Be sure to allow the blade to stop before withdrawing from the cut.