How much power does methanol injection add for a diesel?

The extra power produced depends heavily on the concentration of methanol used and the volume injected. Typical power gains in 5.9L and larger applications with a 50% mixture of water/methanol are 50-100 WHP and a 100-150ft lb-ft increase in torque.

Can you put methanol in diesel?

Pure methanol cannot be used directly in unmodified diesel engines because it will require spark or ignition assistance or a fuel additive. However, use of diesel blended with up to 20% of methanol by volume requires only minor engine modifications (Lin & Chao, 2002).

How much HP does methanol injection add?

But generally, gains of 25-45 hp and as many lb-ft of torque are common, making methanol injection one of the best bang-for-the-buck power upgrades for your car.

How much methanol do you inject?

Up to approximately 30 psig of boost, water/methanol injection (using 50% methanol) will provide all the density increase/detonation control needed in most applications. Of course, intercooling and water/methanol injection would provide even greater benefits, especially beyond 30 psig of boost.

Does methanol injection clean valves?

Methanol makes for a very strong cleaning agent and will clear away the gunk that builds up on the valves and keep your engine running healthy and happy.

Can I put methyl hydrate in diesel?

Methyl Hydrate has a low freeze point and is suitable for de-icing applications, but it is not an anti-freeze for diesel fuel. It should not be added to diesel fuel, or used as a fuel.

Will methanol hurt my engine?

Both are safe to use in small amounts, but uncontrolled and unregulated mixing can result in concentrations high enough to cause additional wear and damage over time to sensitive gaskets and hoses in the fuel system. In the future, there may be a place for methanol in our fuel supply.

How long will methanol last?

Store methanol vials in a cool, dry environment, away from VOC sources. Methanol vials should not be stored for longer than 3 months. If the storage environment is potentially compromised, storage time should be less than 3 months.

How do you prevent carbon buildup in direct injection?

Preventing carbon build-up

  1. Change oil according to the manufacturer’s recommended change intervals and using the specified oil for optimal performance of the intake valves.
  2. Replace spark plugs at the recommended mileage to reduce the amount of unburned fuel in the combustion chamber.