How long should rubber tracks last?

between 1,200 and 1,600 hours
Mike Fitzgerald, Bobcat loader product specialist, estimates the average life of rubber tracks to be between 1,200 and 1,600 hours. However, it depends on the operating conditions and the application. “Rental machines will have tracks last in the 800- to 1,200-hour range.

Are rubber tracks good?

Rubber tracks are ideal for less hard and uneven ground because they offer appropriate traction to maneuver around a job site without damaging the surface. If you own compact equipment, you know that occasionally you will have to replace the rubber tracks to avoid downtime and ensure high performance.

What do rubber track sizes mean?

The first number represents the track WIDTH in millimeters. The second number represents the PITCH, the distance between each link “center to center”. And the last number states the total number of LINKS in that track.

What is a lot of hours for a mini excavator?

A high quality, well-maintained mini excavator (aka, compact excavator) has a maximum lifespan of about 10,000 hours. Heavy use and poor maintenance can quickly reduce that to about 8,000 hours.

How do you measure a rubber track?

Three Steps to Measure Your Rubber Track Size

  1. Measure the Width of the track in millimeters.
  2. Measure the Pitch in millimeters. This is the distance between the centers of two links.
  3. Links are also known as drive lugs or teeth.
  4. Count the total number of links in the track.

How can you tell a bobcat track?

Bobcat tracks are larger than a domestic cat and measure approximately two inches. Their front feet are just slightly bigger than their rear feet. Bobcats are diagonal walkers and direct register, which means that their rear feet land in their front footprints. Winter is the perfect time to go tracking!

Can I put rubber tracks on a steel track excavator?

Benefits of Steel Tracks for Excavators If you will be working on abrasive ground conditions and inclined terrains, consider installing steel tracks. Adaptability – You can bolt rubber pads onto the steel tracks to prevent damaging concrete, pavement, or sensitive surfaces.

How many hours should skid steer tracks last?

CTL and skid steer maintenance practices aren’t difficult, but neglecting them could lead to negative consequences. Depending on how well you take care of your tracks, they could last anywhere between 400 hours and 2,000 hours. The average life span ranges from 1,200 hours to 1,600 hours.