How far should arrow rest be from riser?

Registered. As a general rule it’s supposed to be 1″ past the rest, not the riser unless you shoot off the shelf.

How do you install a screw in arrow rest?

Steps for installing an arrow rest

  1. Examine your arrow rest’s parts.
  2. Attach your arrow rest to the bow’s riser.
  3. Set the arrow rest’s up position.
  4. Set you arrow rest’s center shot adjustment.
  5. Tie in the arrow rest’s drop away cord.
  6. Set your tie in point on the downward cable.
  7. Finish tying in the drop away cord.

Can you install a drop away rest without a bow press?

Sure. You can put a short section of serving where you want it on the cable then tie just below the serving with d loop knot. Or you can just lay the rest cord along the cable and serve around both.

What is an average adults draw weight when using a recurve bow?

Archer’s Weight Suggested Draw Weight
Small-Frame Male (120-150 lbs) 30-45 lbs
Medium-Frame Male (150-180 lbs) 40-55 lbs
Large-Frame Females (160+ lbs) 30-45 lbs
Large Frame Men (180+ lbs) 45-60 lbs

How long should my arrows be for a 31 inch draw?

How to: Select the perfect arrow

Bow Arrow length
Draw weight lb. 25″ 31″
15-20 700 500
20-25 700 500
25-30 700 500

Should the arrow rest in the middle of the bow?

Rest should be placed so that arrow is even with the hole that the rest is mounted on. Then set the nock point so that the arrow is at 90 degrees to a string running from axle to axle (on a twin cam or cam. 5 this is easy: the string is your bowstring).