How do I setup my TL MR3420 router?

TP-LINK MR3420

  1. Log into your router by typing 192.168.1.1.
  2. Click on NETWORK in the left menu.
  3. Click WAN Settings in the submenu (page 33)
  4. Locate the Primary DNS and Secondary DNS fields and use the addresses 208.67.222.222 and 208.67.220.220.
  5. Click SAVE and the device will reboot.

What does a TP Link TL MR3020 do?

Travel Router with 3G/4G Function TL-MR3020 is the ideal travel partner for people on the go. 3G Router Mode enables you to plug in a 3G USB modem and share it wirelessly. Its Travel Router Mode (AP Mode) allows you to conveniently setup an internet connection utilizing a hotel WAN cable.

How do I reset my Tplink MR3420?

Reset the TP-Link TL-MR3420 router Press and hold the button for 20 seconds, the router will restart and reset to the factory settings. Note! After TP-Link TL-MR3420 has been reset, all settings that apply to the connection and the network must be reconfigured. After resetting, the router will restart.

How do I connect my TP Link TL WR940N to WIFI?

TP Link TL-WR940N

  1. Plug router into a power source.
  2. Plug ethernet cable from internet source(modem, ONT) to internet port. You should already have internet connection with WorldNet.
  3. Connect your PC to the router.
  4. Go to the router’s access page in your browser.
  5. Start setup wizard.
  6. Connect WIFI.

How do I setup my tp-link wireless router?

  1. Step 1: install the TP-Link Tether app.
  2. Step 2: connect your router.
  3. Step 3: connect to the Internet with the new router.
  4. Step 4: open the Tether app and log in.
  5. Step 5: adjust router settings.
  6. Step 6: save everything and connect to the Internet.
  7. Step 7: link to your TP-Link Cloud.

How do I access my tp-link 4G router?

How do I log into the web-based Management Page of TP-Link Wireless N 4G LTE Router (new logo)?

  1. Connect your computer to the router (wired or wireless).
  2. To access the configuration utility, open a web browser and type the default address http://tplinkmodem.net in the address field of the browser.

How do I use my TL MR3020 as a repeater?

How to configure Repeater/Bridge Mode on TL-MR3020 (new logo)?

  1. Log in the router.
  2. Select Repeater/Bridge Mode and click Next.
  3. Click Scan to find the network you want to extend.
  4. Either customize your Network Name (SSID) and Password or keep the default ones, and then click Next.
  5. Click Save to complete the configuration.

Why is my tp-link router not working?

In most cases a power cycle of your router and modem can fix a lot of concerns, including issues accessing the router’s management utility. If you are having access issues try to reboot your router. You can unplug/plug the power cable or press on the power button off/on to reboot your TP-Link Router.

How do I connect my tp-link to the Internet?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.