How do I get my Yamaha receiver to show on my TV?

Speakers:

  1. Press the Setup Button on the remote control.
  2. View On Screen should show up on the receiver front panel and the setup menu should display on your TV.
  3. Use the Arrow Left/Right buttons to navigate to Speaker.
  4. The speaker setup window will show up on the TV.

How do I setup my Yamaha RX-V473?

RX-V473 Advanced Setup Menu

  1. Set the unit to Standby Mode using the Power button.
  2. While holding down Straight button, hit the Power button.
  3. Use the Program Selector buttons to navigate the Advanced setup menu items and the Straight button to make selections.

How do I get my HDMI ARC to work on my Yamaha receiver?

You can enable or disable the audio return channel (ARC) function within the setup menu of in receiver. Make sure that you have ARC turned on. Using the Yamaha remote, press ON SCREEN, go to Setup, and select HDMI. In the HDMI menu select ARC and turn it on.

How do I display the receiver menu on my TV?

You can display the menu of the receiver on the TV screen.

  1. Switch the input of the TV to the input to which the receiver is connected.
  2. Press HOME to display the home menu on the TV screen.
  3. Press / repeatedly to select the menu you want, then press to enter the menu.

How do I get to the setup menu on my Yamaha receiver?

While holding down STRAIGHT on the front panel, press z (power).

How do I turn on HDMI CEC on my Yamaha receiver?

You will also need to go to the settings in your AV Receiver and enable CEC & ARC (Audio Return Channel). For the Yamaha AV Receivers, Select “On Screen” then go to “Setup” (Toolbox icon). Go over to HDMI and turn On HDMI Control, after that is complete, press “OK” and make sure “ARC” is set to “On”.

How do you get to the menu on a Pioneer receiver?

Just shows the big pioneer logo on the screen. To get to settings menu or main menu I would push this button called MAIN, then you push the button that looks like a house icon to bring up the menu. So I had to use the little display on the audio receiver.

How do I get to the setup menu on a Denon receiver?

To access your GUI or OSD menu, you would press the “Menu” or “Setup” button on the remote. For older Denon receivers, you would press the “System Setup” or “Setup” button depending on the age of the model.