How do I find the IP address of my Zyxel router?

Open your web browser of choice and type IP address of your ZyXEL router in the address bar. You can find the ip address on the back of your router.

How do I login to my Zyxel router?

Open a browser and type in your router IP address on URL field. If you haven’t changed it before, you can use our default IP address (192.168. 1.1) to login, as shown below. changed it before, please login with default username/password (admin/1234).

What is the default username and password for Zyxel?

First, you will need to log in via IP Address. To do this, open any browser and navigate to 192.168. 1.1. The default username is admin and the default password is 1234.

Can’t connect to Zyxel router?

Ensure the Wi-Fi ON/OFF button is set to the ON position. Turn the Wi-Fi ON/OFF button to the OFF position, wait 10 seconds, then turn back ON. If that doesn’t work, reboot the Zyxel router by removing the power plug from it for 10-15 seconds and then plugging it back in.

How do you find the IP address of a router?

Find Your Router IP Address on Android

Go to Settings.
Tap Wi-Fi Settings.
Tap and hold on your connected network and select Manage Network Settings.
Check the box next to Show Advanced Options.
Select Static under IP Settings.
Your router IP address is listed under the Gateway section.

How do I reset my Zyxel router IP address?

LTE3302 – Changing the IP Address

Either connect your computer directly to one of the LAN ports of the LTE3302 or connect to the pre-configured WiFi (SSID and PSK are stated on the back of the device)
Login to the routers default IP 192.168.1.1 using the default credentials admin/1234.
Go to Configuration > Network > LAN.

How do I connect to Zyxel WiFi?

Type http://192.168.1.1 on the browsers address bar and press/hit the ENTER/RETURN key on your keyboard. This will open the routers login screen. Type in the device password on the login screen to continue the setup. The default password for the Zyxel router is 1234.

How do I reset my ZyXEL router to factory settings?

After boot up, the power light should turn solid. To factory reset the router, push a paper clip, knitting needle or pen into the Reset hole on the back of the router for 10 seconds (or until the lights flash). Please note, this will change the WiFi name and password back to the default.

How do I configure my ZyXEL router?

ZyXEL VMG1312-B10D

With an Ethernet cable (RJ45), connect the Telkom Fibre modem to the ZyXEL VMG1312-B10D router on LAN port 4.
Connect via Ethernet cable or wireless to the ZyXEL VMG1312-B10D for configuration.
Open web browser, in the address bar type 10.0.0.2.
Enter username (admin) and password (admin).

How do I reset my Zyxel wireless router?

The following is how to reset a Zyxel router;

With the device on, find the reset button on the back of your Zyxel router. It’s a small pinhole button.
Get a pin and use it to press on the reset button.
Keep pressing for at least 15 seconds.
Your Zyxel router will now be reset to factory defaults.

How do I reset my Zyxel Internet?

a needle, paper clip, toothpick), press and hold the reset button for 30 seconds until the Internet light turns red. Release the reset button. Your modem will restart automatically. Please allow up to 10 minutes for the process to complete.

How do I find the IP address of my Zyxel router?