Does Range Rover Sport have towing electrics?

Range Rover Sports Towbar Electrics Kits It is recommended that all tow bars fitted to a Range Rover Sports vehicle are done so with a dedicated electrics kit, rather than a universal electrics kit.

Can you put a tow bar on Range Rover?

The best towbars for Land Rover & Range Rover Our range of Westfalia and Witter Towbars for Land Rover & Range Rover includes detachable, swan neck, fixed and flange variations. These have been manufactured to the highest standard because your Land Rover or Range Rover deserves the highest quality.

Where is the towing eye on a Range Rover Sport?

The rear towing point is located behind a removable cover in the rear bumper. The towing eye is stored in the tool kit, located in the underfloor area of the loadspace. To remove the cover: Rotate each of the three fasteners 90 degrees counter-clockwise with a coin, or a similar object, to release the lower edge.

Do Range Rover sports have tow hitch?

This is a Class III hitch receiver with a 8000 lbs towing capacity and a 800 lbs tongue weight.

What is electrical towing preparation?

What is trailer preparation? Simply put, trailer preparation means some of the towbar wiring has already been installed at the factory, often running up to the back of the vehicle, allowing a much shorter and cheaper wiring kit to plug in to complete the wiring.

How do you put a hitch on a Range Rover?

How to Install a Land Rover Tow Hitch:

  1. In order to install the hitch, locate the red plastic cap underneath the backside of your Land Rover.
  2. Ensure that the key on the hitch is locked and cannot be moved.
  3. Insert the hitch receiver into the slot.
  4. Turn the key to lock it into place and remove the key.

Do I need dedicated wiring for my tow bar?

A dedicated towbar wiring kit it the best choice for your towbar electrics as it the only wiring that will synchronise with advanced vehicle functions. These could include enabling trailer stability control or the reverse lights on the back of your trailer.

How do you remove a towing eyelet?

Take out the towing eye from the foam block under the floor in the cargo area. Remove the cover – press on the marking with a finger while you fold out the opposite side/corner. The cover pivots around its centre line and can then be removed. Screw in the towing eye until it reaches its end stop.

What is a tow eye used for?

The towing eye may be used to pull the car up onto a recovery vehicle with a flatbed platform. The car’s position and ground clearance determine whether it is possible.