What are the buttons on a mortise lock?

Some mortise lock functions use buttons or a toggle on the door edge to lock or unlock the outside lever. They’re not as common any more, but some facilities have a strong preference for this type of lockset.

When was the mortise lock invented?

In 1865, Linus Yale, Jr. patented the cylinder mortise lock, which would revolutionize the industry. It used a pin tumbler cylinder with a series of spring-loaded pins that had to be raised to an exact height by the notches on a flat key before it would turn to operate the deadbolt (see opposite).

Why has my door lock stopped working?

If the door latch doesn’t engage then it may be out of alignment with the strike plate (the bit on the door frame that the bolt goes into). Try the following: Tighten the screws on the door hinges. Try adjusting the strike plate by loosening its screws and shifting it slightly.

How to rekey a Schlage without a key?

Use lock-picking tools legally to unlock your own door.

  • Use a paper clip to firmly press into the knob hole,located on the side of knob.
  • Separate the cylinder housing and use the retainer ring tool in the re-keying set to remove the retainer ring.
  • Remove the cylinder plug from the cylinder by using the plug follower tool in the kit.

    • How to install a Schlage deadbolt lock all by yourself?

    Get the Old One Out. The very obvious one out of Schlage installation instructions is getting your existing deadbolt lock removed.

  • Installing Connect Next. Now with the new deadbolt,first thing you need to do is getting its latch fixed.
  • Working on The Plate. Now time to work on the deadbolt strike plate.
  • Connecting It to Smart home Hub.

    • How to fix electronic Schlage deadbolt lock?

    Schlage Double Cylinder B160 style DeadboltWhen the key turns in a complete circle and doesn’t unlock the tailpiece is probably broken. Here is how to repair…

    How to remove a Schlage doorknob?

    Removing a Schlage Door Knob Step 1: Pry Off the Screw Cover. In order to remove your Schlage doorknob, you first need to get access to the screws that hold it into place. If you try to remove the doorknob without removing those screws, you not only risk damage to the doorknob, but you run the risk of damaging the door as well.