Why does my iPhone cable break so easily?

Apple uses a lightweight and flexible wire for connecting their mobile products. This is actually very nice except they won’t take much abuse. Cables breaking at the plug is a common problem across the industry. That is why strain reliefs are made.

Why does my iPhone 5 charger keep breaking?

If your iPhone charger isn’t Apple-certified and it keeps breaking, that’s because it’s of cheap quality. Non-certified Apple chargers will contain flimsy materials, so even if you do take care of your charger it’s still most likely going to die on you, and it could damage your iPhone, too.

How do I stop my iPhone cord from breaking?

Here is how you can keep your iPhone charging cables last much longer.

  1. Loop the Cable. Never throw the charging cable in your drawer or bag after use.
  2. Connect and Remove the Charger Carefully.
  3. Avoid Excessive Bending.
  4. Don’t Use Your Phone While Charging.
  5. Get A Reinforced Charging Cable.

How long do iPhone cables last?

The main complaint is that the cord just stops working unexpectedly; its lifespan is about four-to-twelve weeks. If you’re extremely lucky, you’ll reach the epic six-month mark, but at that point, you’ve probably lost the cord anyways.

Why do iPhone cords go bad?

The metal contacts at the terminating end of your lightning cable can oxidize from moisture. This is usually not a problem, but sometimes the oxidation is so prevalent that it can cause issues with charging.

How can I prevent my cable from breaking?

You can take your time neatly wrapping the cable to reinforce it, but the best way to prevent any more damage is to wrap the split or fraying part of the cable several times with electrical tape, then work your way out from that spot. This immobilizes any breaks in the cable and helps prevent further damage.

Why does my iPhone keep ruining chargers?

Most likely the lightning to USB cable and/or your iPhone’s charging port could be dirty. Try to gently clean it using a strong flashlight, a toothpick, a soft brush and… a bit of patience.

How can I strengthen my iPhone cable?

You just coil them onto the cable where you want to protect it….Wrap a pen spring around the end of a cable wire to prevent fraying.

  1. This will help prevent fraying at the cable’s most delicate point while still keeping it flexible.
  2. Use 2 pens springs to reinforce both sensitive ends.

Does Apple guarantee their cables?

Apple cables (including the Lightning to USB cable included with iPhone) are covered under Apple’s One Year Limited Warranty against defects in materials and workmanship, but not against accidental damage or damage caused by misuse or using the cable outside Apple’s guidelines.

Why do phone charging cables wear out so fast?

Repeated flexing, especially near the ends of the cable, can break some or all of the very thin wires inside. If some of the wires are broken, the remaining wires may be insufficient to carry the charger’s normal output, leading to slower than normal charging.

Do iPhone cords wear out?

If you charge your iOS device two or even three times a day, the charger itself and the cable will wear out faster. If you often bend the cable, the wire inside also gets bent back and forth. This will weaken and break the cable much faster. Then, you need to store the charger in a well-ventilated place.

Why do some iPhone charging cords stop working?

Your iOS device might have a dirty or damaged charging port. Your charging accessory is defective, damaged, or isn’t Apple-certified. Your USB charger isn’t designed to charge devices.