Are all baths 700mm wide?

Are all baths 700mm wide?

Standard bath size As it is commonly accepted that the standard bath width is 700mm, a wide bath is considered to be any bath with a diameter of 800mm and above. Large baths with dimensions over 1800mm in length and over 800mm wide tend to be freestanding baths.

What size is a bath in inches?

The standard size for a freestanding tub is: Length: 55 to 72 inches (about 4 1/2 to 6 feet) Width: 27 to 32 inches. Height: 15 to 20 inches.

How wide is a 72 inch tub?

Large size you are looking at 72 inches long (6ft), 42 inches wide (3.5ft) and 20 inches of water depth (1.6ft).

What is the actual size of a 60 inch bathtub?

The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high.

How do I measure the size of my bathtub?

Using a power tape, measure the edge of the tub from one end to another for height and width. To measure the height of the bathtub, take measurement from the floor to the top. If you don’t get a round figure, take a number that is close to the standard size, that is listed below.

How are baths measured?

To measure the length of free-standing baths, the height and width are measured using the top edge or lip. For the depth, measure from the floor to the top edge and will include the bathtub’s feet if you’re buying this style of free-standing tub.

How is a bath measured?

What size is an average bath?

Single Ended Baths

How wide is a standard tub?

32 inches wide
The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep.

What is the size of a small bathtub?

What is the smallest size bathtub? For an alcove or drop-in model, the smallest size bathtub is generally 48 inches long, with a width of 30 to 32 inches. If you opt for a freestanding bathtub, you may be able to shrink the dimensions by a few inches.