What kind of hydraulic fluid do you use in a wood splitter?

AW22 or 32 Hydraulic oil is recommended for the log splitter. Automatic transmission fluid can be substituted and should only be used instead of hydraulic oil when temperatures are below 32 degrees F.

Can I use hydraulic jack oil in my log splitter?

Therefor, It is fair to ask what hydraulic oil is recommended for log splitters in order to get the right product. In short, you should always use the recommended hydraulic fluid provided by the log splitter manufacturer.

Is hydraulic oil and hydraulic jack oil the same?

What is hydraulic jack oil and how is it different from ordinary hydraulic fluids? The answer is clear, that hydraulic jack oil itself is a hydraulic fluid that is used for power generation, sealing, heat transfer, lubrication and more. But, we differentiate these fluids on the basis of its properties.

How often should I change the hydraulic fluid in my log splitter?

Whether it’s gas or electric log splitter, it is recommended to change the hydraulic fluid every 100 hours of work (be sure to check they manual of your exact machine). In addition, just like your car, you need to change the log splitter hydraulic oil filter also.

Do you need to change hydraulic fluid in a log splitter?

How do you add hydraulic fluid to a wood splitter?

To add the appropriate amount of hydraulic fluid, you must first remove the oil filling plug. Then fill the hydraulic fluid unit until it is three-fourths full. After you have added the right amount of hydraulic fluid, you’ll need to remove, or bleed, the trapped air from the cylinder.

What can I substitute for hydraulic oil?

“It is a common practice in the construction and mining industries to use engine oil SAE 10, SAE 20 or SAE 30 with the lowest API rating as a substitute for hydraulic oil ISO 32, ISO 46 or ISO 68, respectively for hydraulic systems of heavy equipment.