What are the teeth on a forklift called?

FORKS. Perhaps the most obvious of reach truck parts are the forks themselves, also known as the tynes. The forks on a forklift are used to make direct contact with a load for transport. They are attached to the forklift carriage and are designed to carry a load from the bottom.

What are the parts of a forklift called?

Forklift Parts and Functions Terminology

  • Cab: The cab is the central part of the forklift.
  • Carriage: The carriage mounts the forks to the mast and serves as a support structure for the forklift.
  • Mast:
  • Load Backrest:
  • Forks:
  • Overhead Guard:
  • Tires:
  • Counterweight:

What are the forks on a forklift called?

Carriage plate height (C) = Forks (tines) are mounted on a forklift carriage. Fork drop (D) = The fork drop is measure from the top of the lower hook to the floor. Length of fork (L) – measure from the end of the tip to the shank. Length can be given in mm or inches, common lengths are 48” inch, 72” inch and 96” inch.

What are forklift tines?

Also known as tines or blades, these forks are used to lift and carry loads. They are an integral part of the forklift and ensuring you are using the correct ones and that they are in good condition is essential to both the safety of personnel, but also the forklift and the load.

What are the 3 major parts of a forklift?

What Are the Three Major Parts of a Forklift? Answer: The chassis, the mast, and the overhead guard. Additionally, forklifts have numerous safety devices distributed throughout the truck.

How are forklift carriage classes determined?

How are forklift carriage classes determined? If you want to find your forklift’s carriage class, simply measure the distance between the top and bottom carriage bars. Put another way, the distance between the top edge of the upper fork bar and the bottom edge of the lower fork bar = the carriage height.

What is fork carriage?

by Dave Jensen, on September 4, 2020 at 2:15 PM. The forklift carriage assembly is where you mount the forks, load backrest and/or any forklift attachments to your lift truck. It’s important to know your forklift’s carriage class so you don’t accidentally buy the wrong forks or forklift attachments for your equipment.

What are the tips of forks called?

Tines may be blunt, such as those on a fork used as an eating utensil; or sharp, as on a pitchfork; or even barbed, as on a trident. The terms tine and prong are mostly interchangeable.

Why does a fork have 4 tines?

The four tines design is to be attributed to a study on the greater ease of taking food and accompanying it to the mouth: the forks with two or three tines were perfect for piercing food but not for collecting it, and they were also often uncomfortable to bring food to the mouth.

What are the 3 levers on a forklift?

There are three forklift directional controls: park, drive, and reverse. Directional controls can be mounted to a lift’s steering column. Or, they may be placed in a position where an operator controls them with their foot.

What is mast in forklift?

The forklift’s mast, or upright, is the portion of the forklift that lifts, lowers, and positions the loads manipulated by the forks. Each type of mast presents its own set of advantages for different applications depending on their height and stacking requirements.

What is a Class 2 carriage?

Class 2. Carriage height: 16” Lifting Capacity: Between 2,200 lbs. and 5,500 lbs. Class 3.