How much HP can you get from a stock LS1?

about 900 hp
The stock crankshaft can handle about 900 hp and 7,000 rpm (for a limited time).

How much HP does a 2000 Pontiac Firebird have?

200 to 330 hp2000 Pontiac Firebird / Horsepower

How much HP can you get out of a 5.7 LS1?

As a starting point, the LS1 was an eye-opener for Chevy fans. Its all aluminum architecture made it significantly lighter than past GM V8s, and power was great: the engine was rated at 345-350 horses in the Corvette (depending on model year) and would check in at as much as 325 hp in the F-body cars.

How much horsepower does a 2000 WS6 have?

305 to 330 hp2000 Pontiac Firebird Trans Am / Horsepower

How much boost can I run on a stock LS1?

on a stock ls1/ls2. These boost numbers can be plenty safe so long as the car has the proper tune. that PSI *can* be safe detonation wise (with a really good tune!)…but common evidence suggests that 500-550rwhp is about the limit of stock internals, mainly the pistons and con rods begin to start dying over 550rwhp.

How can I make my LS1 faster?

On a stock LS1 engine, the following upgrades can improve performance and fuel economy:

  1. A cold air intake kit.
  2. Headers.
  3. An aftermarket exhaust system.
  4. A computer programmer.

What motor is in a 2000 Pontiac Firebird?

3.8 L V6
5.7 L V8
2000 Pontiac Firebird/Engine

What year did the Firebird get the LS1?

First Firebird With an LS V-8 Although the all-aluminum LS1 V8 debuted in the fifth-generation Corvette in 1997, GM didn’t install the engine in the Firebird Trans Am until the following year. It replaced the LT1 Gen II small-block in the Trans Am and Formula.

What engine is in a 2000 Firebird?

What LS is best for boost?

If you’re planning on boosting your project the 4.8L truck engine will be perfect for you. The 4.8L can take insane amounts of boost completely stock and will really perform well. If you don’t want a barebones 5.3L or 4.8L you could always step up to a 6.2L truck block which is based on the LS3 engine.