How do you make a bookshelf out of crates?

Crate Bookcase How-To Instructions:

  1. Place two crates next to each other, touching at solid sides. Attach with brad nails or screws.
  2. Attach plywood to top of crates with brad nails.
  3. Attach both sets of crates together with brad nails.
  4. Attach casters to bottom with wood screws.
  5. Photo: Courtesy of Crates and Pallet.

How do you make a bookshelf out of milk crates?

  1. Step 1: Step 1: Acquire Milk Crates. Locate your favorite grocery store and find some discarded milk crates.
  2. Step 2: Stack or Configure Milk Crates. Place milk crates side by side, or stacked on top of one another.
  3. Step 3: Place Books on Your New Bookshelf.
  4. Step 4: Disassemble Shelves.
  5. 12 Comments.

Can you stain wood crates?

Dip your cloth or brush into the stain, and working in small sections, apply the stain to the crate generously in the direction of the wood grain. Let the stain sit on the surface for a few minutes (more time = deeper color), and then wipe away the excess with a clean rag.

How do you finish a wooden crate?

Using a clean, high quality synthetic bristle brush, apply the polyurethane to the crate using long, even strokes in the direction of the wood grain. FINISH: Let the crate cure for 48 hours before light use, and seven days before heavier use.

How to make an easy wooden crate shelf (DIY)?

Crates are available in various shapes and sizes

  • Apply a clear finish,stain or paint
  • They’re easy to hang and take down

    • How to build a DIY floating crate bookshelf?

    Cut the Aluminum. Start by making the aluminum hangers.

  • Drill Holes for the Bolts. When you’re done cutting and smoothing the aluminum,mark the aluminum using Figure B,in project PDFs below,as a guide.
  • Mark and Drill the Board.
  • Mount the Hangers.
  • Tighten the Hanger Nuts.
  • Screw the Board to a Stud.

    • How to build a simple modern DIY bookshelf?

    How to build the modern bookshelf –. Building this modern bookshelf basically consists of 5 easy steps –. Make the cuts and sand the boards. Make the pocket holes. Assemble 1 side. Assemble 2nd side. Add the back. Truth is sanding the boards is probably the longest step in this process but when is it not…. Below is a full video tutorial

    How to build crate Furniture bookshelves?

    Minwax® Water Based Pre-Stain Wood Conditioner

  • Minwax® Wood Finish in Espresso (not pictured)
  • Minwax® Wood Finish Water Based Semi-Transparent Color Stain in Indigo
  • Minwax® Polycrylic Protective Finish in Clear Ultra Flat