How do you fix Windows Cannot load the device driver for this hardware code 39?

To resolve the error, remove the device from Device Manager and then reinstall or upgrade the driver. If the error continues to occur and seems to be associated with the optical drive, it may be possible to edit the operating system Registry to resolve the issue.

How do you fix Windows Cannot load the device driver for this hardware because a previous instance of the device driver is still in memory?

A clean boot can help you figure out which program is causing the trouble.

  1. Solution 1: Hold Shift While Shutting Down.
  2. Solution 2: Reinstall USB Devices in Device Manager.
  3. Solution 3: Make sure Hard Disk is never Turned off.
  4. Solution 4: Run the Hardware & Devices Troubleshooter.
  5. Solution 5: Clean Boot.

How do you fix this device is not working properly because Windows Cannot load the drivers required for this device Code 31?

Update the drivers for the device. Installing the latest manufacturer supplied drivers for a device with the Code 31 error is a likely fix for this problem. Reinstall the Microsoft ISATAP network adapter if the Code 31 error is related to the MS ISATAP adapter not working properly.

How do I fix error code 39?

Code 39 “Windows cannot load the device driver for this hardware… (Code 39).”

  1. From Start, search for device manager and select Device Manager from the results.
  2. Right-click the device in the list.
  3. Select Uninstall from the menu that appears.
  4. After the device is uninstalled, choose Action on the menu bar.

How do you solve Windows Cannot load the device driver for this Hardware because a previous instance of the device driver is still in memory Code 38?

If that does not help, proceed with the following solutions:

  1. Uninstall previously installed drivers and reinstall the newer version from the manufacturer’s website.
  2. Run the Hardware and Devices Troubleshooter.
  3. Re-install USB drivers.
  4. Run the system in clean boot.

How do I fix device driver was not successfully installed Windows 7?

Follow the steps to do so:

  1. Press Windows+X keys and select Device Manager.
  2. Locate the Universal Bus Controllers driver and right click on them. Select Uninstall.
  3. Restart the computer. Windows will install the generic drivers. Connect the devices again and check if it helps.

How do you fix the driver trying to start is not the same as the driver for the POSTed display adapter?

The driver trying to start is not the same as the driver for the POSTed display adapter….Here’s how:

  1. Open Control Panel by right click on Start Button.
  2. In the search box, type troubleshooter, and then click Troubleshooting.
  3. Click on the view all option on the left panel.
  4. Run the Hardware and Devices troubleshooter.