How do you apply Behr semi transparent deck stain?

Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the stain. Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.

How long does Behr semi transparent stain need to dry before rain?

4 hours
Must apply between 35-90˚ F and temperature must stay above 35˚ F for the next 12 hours. Avoid applying in direct sunlight or to hot surfaces. Coating will resist rain after 4 hours. The surface must be completely dry before application.

How many coats of stain should Behr deck?

Two
Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily. Two thin coats required.

Do you need two coats of semi transparent stain?

With a solid stain, CR typically recommends putting on two coats because these are more like a regular paint and will dry one on top of the other. But with a clear or semi-transparent wood stain, a second coat will just sit on the surface of the first coat.

Do you need two coats of semi-transparent stain?

How soon can you walk on Behr deck stain?

Wait 24-48 hours before light foot traffic. 72 hours for full cure. Additional dry time may be needed in cooler temperatures and higher humidity.

Do you need 2 coats of semi-transparent stain?

How long should you wait to put on a second coat of stain on a deck?

For best results, avoid staining at midday or in direct sunlight. If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.

What happens if you apply second coat of stain too soon?

If you apply a second, unnecessary coat of stain to wood that is already adequately covered, you risk creating a tacky surface that is prone to early peeling because the second coat is not penetrating the wood surface, but simply laying on top of the first coat of stain.

https://www.youtube.com/watch?v=rE62k6gDVpo