How do I setup my Linksys WRT54G wireless router?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

How do I access my Linksys wireless G access point?

Connecting an access point to a Linksys wireless router

  1. Open the access point’s web-based setup page by entering the default IP Address “192.168.
  2. On the web-based setup page, click on Wireless.
  3. Enter the Network Name (SSID).
  4. Click Wireless Security and select your desired Security Mode.

What is the default IP address of Linksys wireless G access point?

This article will guide you on how to check and configure the IP address of your Linksys wireless access point. The default IP address of a WAP54G is 192.168. 1.245 and the Configuration Type is Static IP.

How do I reset my Linksys wireless G access point?

Resetting the access point using the Reset button Press and hold the Reset button of your access point for 30 seconds. Once the access point is reset, perform a powercycle. Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid.

How do I find my Linksys wireless router IP address?

  1. Click Network.
  2. Click on Wi-Fi then click the Advanced… button.
  3. Select TCP/IP. Your router’s local IP address should be displayed in the Router field. In the example below, the local IP address of the router is 10.150. 104.80.

What is the default IP address of the WRT54GS?

The default IP address of your device is 192.168.1.1 . To log in, enter “admin” on the password field and leave the username blank. 3. How can I reset the WRT54GS to factory defaults? Press and hold the Reset button at the router’s back panel for 30 seconds then release.

How do I log in to my WRT54GS to reset it?

To log in, enter “admin” on the password field and leave the username blank. 3. How can I reset the WRT54GS to factory defaults? Press and hold the Reset button at the router’s back panel for 30 seconds then release.

How do I Find my WRT54GS model and version number?

The model and version number is printed on the Linksys sticker at the bottom of the router. Aside from the device itself, the serial number of your Linksys device is also printed on the box. 1. What LEDs does the WRT54GS have? Power – The Power LED flashes green when booting up. It lights up green when the router is ready for use.

Why can’t I upgrade my WRT54G v4 to DD-WRT?

The stock firmware from Linksys on the WRT54G v4 won’t accept a firmware image over 3MB in size (you will get the error: “Upgrade are failed!” if you try) so you will need to flash the mini version of DD-WRT onto the router BEFORE flashing any other versions. Inspired by Murrkf