How do I connect my HP iLO port?

Procedure

  1. Connect an Ethernet cable from the Ethernet port on the laptop to the iLO Ethernet port on the rear of the server.
  2. If necessary, change the IPv4 address of the Ethernet port on user’s Windows laptop:
  3. Use the default user name and password found on the label attached to the top of the chassis to log in.

How configure iLO IP on HP server?

Configuring static IP address

  1. Optional: If user access the server remotely, start an iLO remote console session.
  2. Restart or power on the server.
  3. Press F9 in the server POST screen.
  4. Click System Configuration.
  5. Click iLO 5 Configuration utility.
  6. Disable DHCP:

How do you enable iLO in HP ProLiant dl380 g7?

Press F8 in the HPE ProLiant POST screen. The iLO RBSU screen appears. The Network Autoconfiguration window opens. Press the spacebar to set DHCP Enable to OFF, and then press F10 to save the changes.

How do I boot into iLO?

To setup the iLO:

  1. Restart or power up the server.
  2. Press the F9 key when prompted during POST to enter BIOS. Select “Advanced Options” Select “Advanced System ROM options”
  3. Reboot the server and on ILO prompt press F8. If you did not disable splash screen you will not see this prompt.

How do I find the IP address of my iLO port?

you can go into System Management Homepage-> Management processor link, then when you click it on the left from the task pane you must be forwarded to a link for iLO and you can see the IP address.

What is iLO port on HP server?

Integrated Lights-Out, or iLO, is a proprietary embedded server management technology by Hewlett-Packard Enterprise which provides out-of-band management facilities. The physical connection is an Ethernet port that can be found on most ProLiant servers and microservers of the 300 and above series.

How do I install HP iLO?

Installing an iLO license using a browser:

  1. Locate your license activation key.
  2. Log in to iLO and navigate to the Administration > Licensing page.
  3. On the Licensing page, enter the license key in the Activation Key box.
  4. Click Install The EULA confirmation page opens.
  5. Review the EULA confirmation details, and click OK .

What is the iLO port for HP?

How do I boot from ISO file in iLO?

To start mounting the ISO, select the menu option Virtual Drives at the top of the iLO Remote Console window. Within that menu, select Image File CD-ROM/DVD. This will open a Windows Explorer window. Browse to the location of the ISO on your workstation, select it, and click Open.