Can fog lights be installed aftermarket?

If you replace your stock fog lights with aftermarket fog lights, you may finally start seeing in inclement weather. You aren’t limited to installing them as fog lights, however. You can mount these lights in other places on your vehicle to get more light as well as a more aggressive look.

Do you need a relay to install fog lights?

Do you need a relay for fog lights? Relays with a 30-60A draw are an important component in wiring fog or driving lights. To make a higher current connection to the heavy load of the fog lights, the low current through the switch activates the relay.

Do you have to pay for fog lights on Honda Accord?

The cost for OEM fog lights is relatively inexpensive, and you may even be able to install aftermarket fog lights at nearly the same price. Regardless of which you opt for, here are the proper directions to install fog lights on your 6th generation Honda Accord.

How do you install fog lights on a Ford Explorer?

Route harness “B” through the hole located on the right bulkhead of the inside front bumper. Route the end of harness “B” through the bumper grille, and connect it to both both fog light assemblies. Screw the fog light brackets into the four drilled holes.

How do you install a fog light relay?

Attach the relay bracket to the battery holder stud. Connect the 1-pin connector of harness “B” to the fusible link. Route harness “B” through the hole located on the right bulkhead of the inside front bumper. Route the end of harness “B” through the bumper grille, and connect it to both both fog light assemblies.

How do you wire a fog light to a bumper?

Attach fog light connector to the 2-pin connector. Free the vehicle’s 1-pin connector from under the air cleaner intake pipe. Plug one end of harness “C” into the 1-pin connector. Route the other end of harness “C” throughout the bumper. Appropriately secure and conceal both harnesses using cable tie mounts. Figure 9.