How do I update my Harman Kardon software?

The firmware upgrade will be available at www.harmankardon.com at no charge to current owners. Consumers only need to download the software to a USB memory stick, insert the stick drive into the front panel USB jack on the AVR unit and use the remote to navigate through on-screen instructions to install the upgrade.

How do I update my Harman Kardon Soundbar?

Firmware upgrades will be pushed automatically when there is an active internet connection. To check the current version press and hold DIM LEVEL for 3 seconds. Then press SOUND MODE and NIGHT MODE in that order within 10 seconds. The most recent version of the software can be found when connected to a network.

How do I update Harman Kardon Citation 1 Firmware?

NOTE: Firmware upgrades are automatically downloaded and installed. When you configure your device (again) via the Google Home-app, the system will always check whether a software update is available.

How do I reset my Harman Kardon Soundbar?

Reset your HARMAN/KARDON ENCHANT 800, 1300 From any mode, press and hold the ‘Power’ (left-most button) and ‘Source’ (right-most button) buttons on the soundbar’s top panel simultaneously. When the factory settings have been restored, the soundbar will power down and restart automatically.

How do I connect Citation 1 to WIFI?

1) Download the Google Home app on your smartphone or tablet. 2) Power on your Citation speaker. 3) Run the Google Home app and set up your Citation speaker as instructed in the app. Always follow the instructions in the app to complete the Wi-Fi setup.

How do you pair citation speakers?

CITATION ONE/100/200: How can I create a stereo speaker pair? Print

  1. Open the Google Home app.
  2. Go to the start screen (Home icon on the bottom left)
  3. Select the speaker or room and tap on Settings.
  4. Tap on Audio, find/select the speaker pair and tap Next.

How do I factory reset my Harman Kardon?

The reset button is on the bottom of the Citation One. The text next to it says ‘Reset’. Press the button and hold it for 5 seconds to reset the speaker. After reset, the speaker automatically shuts off and on again.

How do you troubleshoot Harman Kardon?

This troubleshooting page will help you diagnose problems with the Harman Kardon Onyx Studio 2.

  1. Fails To Charge. The speaker will either not charge or has a very short battery life.
  2. Defective Charging Port.
  3. Faulty Power Adapter.
  4. Unreliable Battery.
  5. Distorted Audio.
  6. Bluetooth Not Connecting.
  7. Dirty Speakers.
  8. Broken Speakers.