Why is my grease trap not draining?
Why is my grease trap not draining?
If your grease trap has overflowed, it means that the outlet line or somewhere down stream is blocked….
| Symptom | Likely Root Cause |
|---|---|
| Sink connected to grease trap is not draining | The inlet line to the trap is obstructed or the outlet line from the trap is obstructed and trap is sealed well enough to prevent an overflow |
What do you clean grease traps with?
For a thorough cleaning, utilize the shop vacuum to suck out any lingering FOGs from the grease trap. Next, refresh the grease trap and free the tank from obnoxious odors with a little elbow grease, a steel pot scrubber, dish soap and tepid water. Thoroughly scrub down the grease trap’s baffles, sides and lid.
How often should you pump out grease trap?
every 1-3 months
Most grease traps should be cleaned out every 1-3 months, depending on usage. To know exactly how often your business needs to attend to the grease traps, consider the “1/4th rule.” In simple terms, the grease trap should be cleaned out when it reaches a quarter of its capacity.
How do you know when a grease trap is full?
If your grease trap becomes excessively full, grease will begin spilling out of the primary compartment into the secondary one. This will soon lead to clogs in the lines leading into and out of the grease trap. A full trap will also restrict the flow of water through the system.
Can I use Drano on a grease trap?
Commercial kitchen operators face issues with their sinks, drains and grease traps getting clogged with food solids. To combat this problem, some resort to using chemicals such as Liquid Plumber or Drano to clear these clogs.
Does vinegar dissolve grease?
Vinegar’s acidity helps cut through grease easily. Spray some vinegar and water mix onto a splattered stovetop, let it sit for 10 minutes, and then scrub down with soapy water.
How do you clean a residential grease trap?
Scoop out the grease – After placing a garbage bag into a trash can, dip the catch basin scoop down into the grease trap so the top of the scoop just barely breaks the surface of the water. Slowly pull the scoop up to capture grease and allow the water to drain through the holes on the bottom and sides of the scoop.
Can I use drain cleaner in a grease trap?
Similarly, trying to pour drain cleaner or any other substance into the grease trap can cause a chemical hazard and could incur fines in your district.
What happens when a grease trap is full?
Full Trap If your grease trap becomes excessively full, grease will begin spilling out of the primary compartment into the secondary one. This will soon lead to clogs in the lines leading into and out of the grease trap. A full trap will also restrict the flow of water through the system.
How long do grease traps last?
5-8 years
On average, steel grease traps last 5-8 years. They can be quite heavy, if buried indoors (in a concrete or tiled floor, for example) can be quite difficult to replace.
