How do I change my Brother printer from MP tray to tray #1?

You can change the default tray your Brother machine uses for printing copies by following these steps: Press MENU and choose General Setup => Tray Use => Copy. Press the UP OR DOWN ARROW key to select a setting. You can select Tray #1 Only, Tray #2 Only, MP Only, MP>T1>T2, or T1>T2>MP.

How do you fix a paper jam in tray 1?

Clearing a Paper Jam in Tray 1: Push the baffle back up in place until the two latches click. Ensure the paper is loaded correctly. Insert the tray back into the printer until it snaps into place. Printing automatically resumes.

What do I do when my Brother printer says paper jam but there is none?

Unplug your Brother machine from the AC power outlet (electrical socket). If the paper support flap is open, close it, and then close the paper support. Pull the paper tray (1) completely out of the machine. Pull the two green levers inside the machine to release the jammed paper.

How do I get my Brother printer to print from tray 2?

Click File → Print.

  1. b. Click Properties or Preferences.
  2. c. In the Paper Source dropdown, select the paper tray you wish to print from (ex. Tray 2) for First Page and Other Pages.
  3. d. Click OK.
  4. e. Click OK or Print to print the document.

How do I change the default printer tray?

From the printer properties, change to the Paper tab and select Auto Selection from Paper Source option. Besides, in the MS Word’s Menu bar, click Tools > Option. Then choose the Printer tab. On the default paper tray option, choose Use Default Printer Setting.

What is tray 1 in Brother printer?

If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size and Paper Type settings if needed, following the LCD instructions.

Why does my Brother printer keep jamming?

You may be putting too much paper into the paper tray. It should never be overfilled as it can often cause a jam. If you only put the amount of paper you’re going to use for one printing task, you’re less likely to suffer a jam. Also, make sure the paper fits the tray and that it’s inserted correctly.

Why is my printer saying there is a paper jam when there isn t?

The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed.

How do I change the default tray on a Brother printer?

You can change the default tray your Brother machine uses for printing copies by following these steps: Press MENU and choose General Setup => Tray Use => Copy….

  1. Press MENU and choose General Setup => Tray Use => Print.
  2. Press the UP OR DOWN ARROW key to select a setting.
  3. Press the OK key.
  4. Press the STOP/EXIT key.