Can you use a laser to cut steel tube?

Can you use a laser to cut steel tube?

Materials. Laser tube cutting works on a wide range of materials. Choose this method for carbon steel, aluminum, stainless steel, and titanium. If you need to cut reflective material, you should opt for a fiber laser rather than a CO2 cutter.

Can laser cut tubes?

It is possible to cut up to 500 inches per minute on a tube, but that’s not always realistic. In laser tube cutting, the real focus should be on how long it takes to load a tube, index it so it’s in the right position for cutting, pierce and cut it, and unload the part.

Is there a laser that can cut metal?

Lasers of 6,000 watts are excellent for cutting through especially thick or strong metals, though in many cases the lower wattages are more than enough to get the job done.

How does a tube laser work?

How does a CO2 Laser work? Modern CO2 machines usually produce the laser beam in a sealed glass tube which is filled with gas, usually carbon dioxide. A high voltage flows through the tube and reacts with the gas particles, increasing their energy, in turn producing light.

What is a tube laser operator?

Operates, programs, and troubleshoots tube laser machinery. This position will safely perform laser cutting for a variety of manufacturing products.

How much does a metal laser cutter cost?

In general, the higher the wattage, the higher the machine price. A metal laser cutter ranges from $8,000 to over $250,000! The bottom-end metal laser cutter can handle very small, low volume projects. But for more standard commercial applications, you need a metal laser cutter that will likely exceed the $20,000 mark.

How much does a metal laser engraver cost?

The Best Laser Engraver

Can 150W CO2 laser cut metal?

CO2 Lasers In order to cut metal, these machines must have a minimum rating of 150 W and use oxygen assist.

Can a 100w CO2 laser cut metal?

Here at Kern Laser Systems, we’ve developed metal cutting technology that enables CO2 lasers of 150 to 400 watts to quickly and efficiently cut metal. This technology makes thinner gauge metal material, like stainless steel, aluminum and brass, processable via CO2 lasers.

How long do laser tubes last?

Laser tubes manufactured by reputable suppliers, such as the EFR or RECI tubes used on the Lightblade, typically have a minimum life of 18 months.

What are the disadvantages of a laser cutter?

Although used to produce parts in almost every industry, laser cutting does have it downsides. Namely, need of expertise, limitations to metal thickness, costs and hazardous fumes are all things to consider before turning to laser cutting.