Why is my Aube thermostat not working?

The most likely cause for this issue is electrical interference or “Spiking” in the system most likely caused by a contactor. If the system is not fitted with a contactor or if the system is fitted with a contactor but also with a snubber, please follow the steps below: 1. Move set point up using “UP” arrow button.

How do I turn my Aube thermostat off?

To view the setpoint temperature, briefly press the Up or Down button. The setpoint will be displayed for 5 seconds and the screen illuminated for 12 seconds. To change the setpoint temperature, press the Up or Down button until the desired value is displayed.

What does sun and moon mean on thermostat?

When the switch is set to the “Sun Symbol”, the thermostat controls at the temperature set by the setting dial. When set to the “Moon symbol”, the thermostat controls at 4. below the temperature set by the setting.

Should you leave underfloor heating on all the time?

It is advised that in the depths of winter, an underfloor heating system should be kept on at all times. Although it should be at different temperatures depending on usage and activity in the house. This is because underfloor heating can take two to three hours to warm up, so it is best to not completely turn it off.

What temperature should in floor heat be set at?

The ideal temperature for i- floor heating is 75° F (24° C). For a little range, anywhere between 74° F and 77° F sits in the sweet spot temperature-wise for in-floor heating. Some people will accept that for what it is, but for those curious as to why specifically 75° F is the ideal temperature, keep reading.

Does the sun icon mean heat or cool?

HEAT mode
The sun symbol represents HEAT mode. This is the opposite of the cool mode and is used to heat the room, usually during the cooler winter months. A teardrop or water symbol is used to show the DRY mode. This mode is used to reduce the humidity in the room when the air is warm and very humid.