Whats the difference between hypertherm 45 and 45xp?
Whats the difference between hypertherm 45 and 45xp?
A major difference between the 45 and the 45 XP is Hypertherm’s focus on user experience. On the 45, the control panel was spread illogically over the machine. For instance, the power button was on the back, making it a hassle to get to. With the 45 XP, everything is much easier to access.
Is hypertherm made in the USA?
Hypertherm takes great pride in offering products that are designed and built in New Hampshire, USA. With over 40 years of metal cutting experience, their products are among the best in the world.
How many amps does a hypertherm 45 use?
Engine-driven generator operation
| Engine Drive Rating (kW) | System Output (amps) | Performance (arc stretch) |
|---|---|---|
| 8 | 45 | Full |
| 6 | 45 | Limited |
| 6 | 30 | Full |
How thick can a 45 amp plasma cutter cut?
This is the new digitally controlled 20-55 amps Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, the CUT-45M Air Plasma Cutter cuts a thickness of 2/5 in. with the max severance thickness at 3/4 in.
Where is Hypertherm located?
Overview Suggest Edit
| Type | Private |
|---|---|
| HQ | Hanover, NH, US |
| Website | hypertherm.com |
| Employee Ratings | 4.2 |
| Overall Culture | C+ |
Where is Hypertherm?
Hanover, NH
Company Description: Hypertherm, Inc. is located in Hanover, NH, United States and is part of the Metalworking Machinery Manufacturing Industry.
How many CFM does a plasma cutter need?
These requirements differ between systems, but as an example, an air compressor for a plasma cutter like the Hypertherm Powermax45® requires 6 cubic feet per minute (cfm) at 90 psi. It is important to keep in mind that these are MINIMUM requirements.
Is the titanium plasma cutter worth it?
The Titanium Plasma 45 has a lot of cutting power. It cuts fast and clean, leaving a dross-free edge, except when it cuts metal over 5/8 inch thick. So, if you need to cut thicker metal and want a clean edge, this plasma cutter is a good choice.
