What sizes do barn door hardware come in?

Barn door mounting rails are available in a variety of lengths, the most common options being 60″(5ft), 72″(6ft), and 84″(7ft). You will need a door that is slightly wider than the opening in the wall, usually by about 2″.

Can barn door tracks be cut to size?

A: Yes, you can cut the track down to the size you need without having it compromise the integrity of the track. You can use any saw that is designed to cut steel, including a hacksaw, reciprocating saw or angle grinder.

Can you put barn door hardware on any door?

While you can buy doors intended for a barn-door installation (Home Hardware and Home Depot have lightweight K- and Z-style doors), virtually any door can be converted to a barn door with special tracks and hangers. This hardware is now easy to find in a wide range of styles.

How far out does a barn door stick out?

1 ¾ inch
How far does a barn door stick out from the wall? With a standard track system, a barn door will stick out 1 ¾ inch. However, sometimes this isn’t enough. This is where spacers are helpful in allowing the door to stick out up to 3 ¾ inches to accommodate for baseboard and trim thickness.

What are bypass barn doors?

A set of bypass brackets lets you mount a second track in front of the first, in a configuration that allows the doors to overlap when opening, leaving half of the doorway always accessible. A fresh example of bypass barn doors covering a closet opening. Photo credit: inspiredbycharm.com.

Can you hang a barn door without a header?

Installing a Barn Door on an Existing Wall To safely mount the door, you will need a header board to carry the load of the door without having to open the drywall to modify the studs.

What holds the bottom of a barn door?

The bottom track keeps the barn door from swinging back and forth against the wall. The track should allow about 1/2″ of space between the bottom of the door and the floor for proper clearance.