What items should be checked on a vehicle walk around?

Check outside the vehicle

  • all lights and indicators work correctly.
  • all lenses are fitted, clean and the right colour.
  • stop lamps come on when you apply the service brake and go out when you release it.
  • marker lights are fitted and work.

What is a walk around inspection on a car?

A 360 degree Walk Around inspection involves the driver checking the top and bottom of the vehicle to assure there is enough height clearance, the sides of the vehicle, and the front and back before departing or backing in the vehicle. Another thing to remember is to always use your wheel chocks and cones when parked.

What should you inspect as you walk around the outside of your car?

Body Condition

  • Checking the Tires. You should also check the tire and wheel condition.
  • Make Sure the Lights are Working. This is simple but absolutely vital for your safety.
  • Seats.
  • Dashboard and Controls.
  • Interior Roof.
  • Fluid Checks.
  • Belts, Hoses, and Connections.
  • The Radiator.

What is the most common problem found in roadside inspections?

#1 Most Frequent Roadside Inspection Violation Hours of Service (HOS) violations are the number one most frequently noted roadside inspection violation.

What are the 6 basic dimensions of a vehicle that should be inspected on the 360 degree pre inspection?

You should expect the following elements to be checked: seat belt, brakes, suspension, tires, windshield wipers, headlamps, turn signals, steering wheel, and fuel systems. This level of inspection usually takes between 45 – 60 minutes to complete.

When performing a walk around your vehicle where should you start?

Begin by walking clockwise around the vehicle and check: Each tire, as you pass it, for damage, cuts or obvious problems including low pressure. Headlights, tail lights and turn signal operations. Glass and mirror cleanliness and condition.