What is a #8 plane for?
What is a #8 plane for?
The longest and heaviest of the bench planes, the No. 8 will flatten and true like no other. It is capable of precise joints and perfect flatness of large areas.
What number is a jointer plane?
7
Jointer planes are typically 20 to 24 inches (510 to 610 mm) long, and are the longest hand planes commonly used. Under the Stanley Bailey numbering system #7 and #8 planes are jointer planes.
What size jointer plane do I need?
So how do you pick which length is suitable for your work? The rule of thumb is that you can easily straighten a board that is twice as long as the handplane’s sole. So a 22″-long jointer plane can reliably straighten a 44″-long board. And because typical furniture parts max out at 48″, this makes sense.
What is the longest Stanley plane?
8’s. The Number 8 and 608 were the longest iron planes Stanley made and is 24″ long with a 2 5/8″ wide iron.
What is a number 4 wood plane?
The No. 4 smoothing plane is historically the most common size. It is an excellent balance of sole length and cutter width to be useful for typical furniture parts.
What is a Stanley No 7 plane used for?
Stanley No. 7 Jointer Plane
| Manufactured: | 1869 to 1970 |
|---|---|
| Construction: | Cast iron, rosewood handle & knob |
| Finish: | Japanned |
| Uses: | General purpose bench plane |
| Average Dealer Price: | $50 to $150 |
Why is it called a jack plane?
This tool is called a jack plane because it is the “jack of all woodworking trades.” It is long enough to flatten stock, but it is small enough to move through the wood easily. The most popular model of the jack plane is the #5.
Do you really need a jointer plane?
Most woodworkers know that you need both a planer and a jointer to get the most out of rough lumber (at least for power tool users). The jointer is used to flatten one face and square up one edge and the planer is then used to make the second face flat and parallel to the first.
What do you use a No 6 plane for?
Sized midway between a Jack and a Jointer, the No. 6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a leveled surface ready for the smoothing plane.
