What does DIN mean for skis?
What does DIN mean for skis?
Deutsches Institut für Normung
DIN, short for Deutsches Institut für Normung (German Institute for Standardization), is the industry-adopted scale of release force settings for ski bindings.
What DIN should my skis be at?
Ski Binding DIN Chart
| Weight | Average Beginner DIN | Average Advanced/Expert DIN |
|---|---|---|
| 126 – 147 lbs | 4.5 | 6.5 |
| 148 – 174 lbs | 5.5 | 7.5 |
| 175 – 209 lbs | 6.5 | 9 |
| More than 209 lbs | 7.5 | 10.5 |
What is a DIN type ski boot?
DIN stands for Deutsches Institut für Normung (German Institute for Standardization) and is the industry standard scale for release force settings for ski bindings. This is the tension adjustment on the front and back parts of the bindings, and it determines how easily your boot will be released from the binding.
Do I need a 16 DIN binding?
For most women and lighter men (100 – 170lbs), a 10 or 11 max binding DIN should be sufficient. For larger individuals (160 – 250lbs) a 12 -14 max binding DIN would be more appropriate. Usually, only folks who weigh around 250lbs or pro/competition skiers will use a binding with a max DIN higher than 14.
What is DIN boot size?
The DIN setting, which will be configured for you by a qualified ski tech at your local ski shop, is based on your height, weight, ability level, and boot sole length. The lower your DIN level is set to, the sooner your bindings will release when force is applied to them.
Is DIN 10 enough?
10-12 is plenty of din. No need to go any higher. You are probably going to get lots of flak for this post but I’ll respond anyways. I’m your height and a little heavier (170 lbs) and I never need anything more than 12.
How tall should skis be?
The general rule is for your skis to measure somewhere between your chin and the top of your head. With expert level skiers often choosing skis slightly above their head.
What does Din mean on a ski?
DIN settings relay how much force is required, specifically forward pressure and torque, before the binding releases the boot from the ski. By having a universal set of numbers to refer to, ski technicians can reliably set the DIN for individual skiers.
What Din should I set for my skier code?
Weight is one of the most important parameters for setting the DIN, but the specifics stop being important beyond 210 pounds (or 95kgs). Those beyond 210 pounds will have a skier code anywhere from M to P, the specifics of which only depend on their boot length and skiing ability. Weight is also the main parameter for determining your skier code.
What do ski shops look for when measuring your Din?
When having your DIN set in a ski shop, you will be asked for the same information: your weight, height, and boot length. It’s wise to have your weight and height measured beforehand, but most ski shops will have their own scales and charts, so you can still get an accurate reading if you’re unsure.
What is the Din setting on ski bindings?
It is the original standard that the ski industry has adopted in ski bindings, and is now published by the ISO (International Standards Organization). DIN settings relay how much force is required, specifically forward pressure and torque, before the binding releases the boot from the ski.
