How do I use BlueAnt Bluetooth?

Take the Right Pump Air 2 and place it in your ear, press and hold the button until the ear bud says “powering down” and let go of the button. Now press and hold the button until the ear bud says “Pair me” then let go of the button. the light should be flashing rapidly. Place the right ear bud near the left ear bud.

How do you use Blue Ant speakers?

To connect two X2 together please follow these instructions:

  1. Power on the first speaker.
  2. Press and hold the volume + and volume – buttons for 4 seconds.
  3. Power on the second speaker.
  4. Press and hold the volume + and volume – buttons for 4 seconds.
  5. Please wait until one speaker says “DUO mode connected”.

How do I connect my blue ant speaker to my phone?

Power on the speaker and enter Bluetooth mode. The light indicator will flash. On your smartphone search Bluetooth devices for the “BlueAnt X1”. Once connected the speaker will announce it is “connected” and the indicator light will cease flashing.

How do I pair my BlueAnt st3?

How Do You Put Blueant In Pairing Mode? Put the Right Pump Air 2 in your ear, press and hold the button until the ear bud says “powering down” and let go of it. You can now press and hold the button until the ear bud says “Pair me” and then let go. A rapid flashing of the light should be observed.

How do I turn on my blue ant speaker?

With the X1 speaker off please press and hold the power button. The start up sound will sound and the led will flash. Keep holding the power button until you see the battery indicator lights turn off. Then let go of the power button.

How do I reset my BlueAnt Bluetooth?

Reset the BlueAnt device. Press and release the “Vol +,” “Vol -” and “Multi-Function” buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.

How do I connect my BlueAnt speaker to my iPhone?

Turn the X1 on by pressing the power button on the back, the X1 will announce “Bluetooth” and the light on the back will flash to signal the X1 is in pairing mode. On your phone or source device search for and select the BlueAnt X1.