How do I print a configuration page on a HP LaserJet P1102w?

Print a Self Test/Device Configuration page through the control panel (HP LaserJet Pro M12w, P1102w, and P1109w printers)

  1. Press and hold the Cancel button until the Ready light blinks.
  2. Release the Cancel button . The Self Test/Device Configuration page prints. Figure : Self Test/Device Configuration page.

How do I find the IP address for my HP LaserJet P1102w?

Disconnect the USB cable from the printer. Be sure “Print Test Page” is selected, then press the “Finish” button. The Windows Printer Test Page will print the DHCP-assigned IP address of the printer.

How do I restore my HP LaserJet P1102w to factory settings?

To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don’t release the two buttons until the printer stops making noise.

How do I connect my HP LaserJet P1102w printer to WiFi?

Here are the steps:

  1. Unplug the USB cable from the printer and computer if present.
  2. Go to Control panel – Programs and feature – Select all the HP LaserJet printer entries and uninstall them.
  3. Restart your computer.
  4. When prompted, select the Connect through a wireless network option.

How do I find my HP printer configuration page?

From the Home screen on the printer control panel, swipe right to navigate, and then touch Reports. From the Reports menu, touch Configuration/Status Pages. Select the Configuration Page item, and then touch the Print button to print the Configuration pages.

What is the IP address of HP LaserJet p1102?

IPv4 Address: The address the router has assigned your printer, which will probably be of the form 192.168. x. xxx.

What is the IP address of HP Laserjet p1102?

How do I reset my HP LaserJet printer to factory settings?

Open the Setup menu. Use the left and right arrows to navigate to the Printer Maintenance menu. Navigate to the Restore menu, and then press the OK button. Navigate to Restore Factory Defaults, and then press the OK button.

How do I connect my HP LaserJet printer to WIFI?

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)

  1. Place the printer near the Wi-Fi router.
  2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
  3. Select the name of your network, and then enter the password to complete the connection. Note:

How do I print a configuration page on HP Laserjet?

Press the printer’s MENU button until INFORMATION MENU appears. Press ITEM until PRINT CONFIGURATION appears. Press SELECT to print the Configuration page. The display will read PRINTING CONFIGURATION and the Configuration page will print.