How do I pair my vgate?

How to pair iCar Pro BLE 4.0 to your device (use OBD Auto Doctor)

  1. Run OBD Auto Doctor app.
  2. Tap Extras button on the Status page.
  3. Tap Connectivity in the setting menu to select connection type.
  4. Select adapter type to Bluetooth.
  5. Select device as Vgate.
  6. Back to Status page, Click Start connect.

How do I scan using vgate?

Installation Steps

  1. Plug in the OBD2 Bluetooth adapter. Plug the Vgate OBD2 Bluetooth adapter into your car.
  2. Connect with yours. Phone Activate Bluetooth in your smartphone and connect via Bluetooth.
  3. Download and test app.

What is the pin for OBD2?

Tap on it to pair your phone/tablet with OBD2 adapter. Adapter would ask you for PIN-code. If you don’t know PIN code, check your adapter documentation. Usually it’s “1234”, “0000”, “7890” or “1111”.

What apps work with vgate scan?

WORKS MANY POPULAR OBD2 APP – The Vgate iCar Pro Bluetooth Low Energy device works with most popular OBD apps. Some 3rd party apps like Torque for Android, Car Scanner, OBD Fusion, OBD Jscan, BimmerCode, etc (Fee may apply.

How do I use OBD2 Scanner?

How To Use An OBD2 Scanner? (Step-By-Step)

  1. Step 1: Locate The Diagnostic Link Connector.
  2. Step 2: Connect Your OBD2 Code Reader Or Scanner To The DLC.
  3. Step 3: Enter The Information Requested On The Scanner Screen.
  4. Step 4: Access The Scanner Menu For OBD Codes.
  5. Step 5: Identify And Understand the OBD Codes.

How many pins are in an OBD2 port?

16 pin
Each protocol uses different pins to communicate with external scan tools. Some pins are mandatory, and some are optional, depending on the vehicle’s protocol. The connector may have other pins populated that are unimportant. The OBD II connector has 16 pin locations which are numbered as shown below.