How do I reset my Charter DVR box?

You can reset the box to correct the problem.

  1. Turn off the cable box by pressing the power button on your cable box’s remote control or the power button on the front of the cable box.
  2. Unplug the power cord from the back of the cable box or the electrical outlet it is plugged into.
  3. Wait 15 seconds.

How do I reset my Spectrum box?

The easiest way to reset your Spectrum cable box is to unplug it, wait 60 seconds, and then plug it back in.

Where is the reset button on Spectrum cable box?

Check along the front side of your cable box for a small circular button labeled Reset. If you don’t see the button on the front side of your cable box, then check on the back panel near the power cords. If you can’t find a Reset button on your cable box, then it may reset by holding down the Power button instead.

What does Hunt mean on cable box?

low cable signal
Solution Code If you see the “HUNT” error, it is due to low cable signal. To resolve this issue, please check and secure your cable connections from your TV Box to the outlet.

How long does it take for a spectrum cable box to reboot?

It takes around 60 seconds to reboot your Spectrum cable box.

What is Ref Code S0A00?

Next Steps. If you have the S0A00 error message it means your TV Box has not yet been activated or has somehow lost its activation. If the error does not go away within approximately one hour, determine if the error message is on all your TVs, or just one, and then contact us so a representative can assist you.

Why is my Spectrum DVR not working?

The most common reasons for the Spectrum DVR recording issues are attributed to lack of storage space, incorrect cable connections and cache memory build up in the device.

What does it mean when your cable box says Hunt?

to low cable signal
If you see the “HUNT” error, it is due to low cable signal. To resolve this issue, please check and secure your cable connections from your TV Box to the outlet.