What is Cisco translation pattern?

The translation pattern identifies the dialed digit string to match and the calling or called party transformation settings that should be applied. If the Block This Pattern radio button is selected, a cause code must be selected.

What is transformation pattern?

Transformation patterns determine how the system manipulates the digits that were dialed in an incoming or outgoing call. You can configure transformation patterns when you need to change the calling or called number before the system sends it to the phone or the PSTN.

What is Route pattern in Cucm?

In Cisco Unified Communications Manager Administration, use the Call Routing > Route/Hunt > Route Pattern menu path to configure route patterns. A route pattern comprises a string of digits (an address) and a set of associated digit manipulations that route calls to a route list or a gateway.

What is transformation mask in Cucm?

Transformation masks use mask operations that allow the suppression of leading digits, the modification or preservation of digits, and the insertion of digits. A mask operation requires two pieces of information: the number to mask and the mask itself.

What is called party transform mask?

Transformation masks can be used to manipulate either the calling or called party number. A ten-digit pattern with a five-digit mask applied to it will result in a five-digit number.

What is external phone number mask?

The external phone number mask is a directory number (DN) configuration attribute. The external phone number mask is leveraged in call routing to manipulate the internal directory number to digits that can be routed over the PSTN.

What is partition and CSS?

A CSS defines which partitions are accessible to a particular device. A device can call only those call-routing table entries located in partitions that are part of the CSS assigned to the device. Partitions are assigned to call-routing targets.

What is device pool in CUCM?

A device pool is configured with a name and a CUCM group. It includes roaming-sensitive settings and Device Mobility-related settings configured under Device Mobility Related Information.

What is a translation pattern?

A translation pattern matches the dialed digits in a similar manner to the matching of a route pattern. The primary difference between route patterns and translation patterns is that translation patterns do not have a final call-routing destination (route list, gateway, or trunk).

What is the translation formula?

To translate the point P(x,y) , a units right and b units up, use P'(x+a,y+b) .