What is a single hole faucet called?

Also Known As: Single-lever faucets. Distinctive Features: The single-handle faucet is just what it sounds like: it has one handle that controls both the temperature and pressure of the water. This is the most common type of kitchen faucet control in use today.

Can a single hole faucet be installed in a 3 hole sink?

So if you have a three-hole sink with the outside holes 4 inches apart, you should be able to install a single-handle bathroom faucet. However, a deck plate to cover all the holes is usually needed. Many single-handle bathroom faucets include an “escutcheon” or deck plate for this very reason.

Are single hole faucets standard size?

A standard sink faucet hole has a diameter of 1 3/8 inches, but because not all faucets are the same, some will require a 1 1/2-inch hole. It’s also important to check the depth of the sink or countertop before installing a faucet or drilling a hole. If the deck is too thick the faucet may not fit correctly.

How do single hole faucets work?

In a single-hole design, hot and cold water are combined in a one-piece casting that also houses the valves. This type of body is available in one- or two-handle designs. With the bridge design, a pipe joining two separate valves blends the hot and cold water before it reaches the spout.

Can you replace a centerset faucet with a single hole?

Replacing a 4-inch Centerset A 4-inch centerset faucet uses three holes for mounting, but this can be replaced with a single-lever faucet without also replacing the sink or countertop with a single hole.

Are all single hole kitchen faucets the same size?

Since there are many different types of kitchen faucets, there is no standard or typical hole size. What is this? The faucet hole size will vary depending on the kitchen faucet you plan to install. Measure the faucet hole size before you shop.

Will any faucet fit my sink?

If there is only one hole in your sink you’ll need a faucet designed with the handle as part of the faucet. If you have three holes but want a decorative set of water lines above the sink, select a “bridge faucet” that mixes the hot and cold.

Can you replace a 2 handle faucet with a 1 handle faucet?

If you want to change from a two handle set to a one handle you’ll need to buy a single handle faucet with a base that’s wide enough to cover the other two unused holes. Many bases will cover over unused holes that are four inches or less apart. Some single faucets are also available with eight-inch baseplates.