Why put a kick plate on a door?

Door kick plates are a sheet of material attached to the bottom of your door to protect it from damage. They get their name from when people kick the door open when they have their hands full. So this is why you’ll see them in commercial and public buildings.

Do you put kick plates on both sides of the door?

You can install kick plates on both sides of the door if you wish, and enjoy the custom look and protection whether inside or outside.

How high should a kick plate be on a door?

Measure the height from the bottom of the door to the bottom of the first decorative panel or inset on the door. Subtract 1 inch from the total to allow 1/2 inch of clearance on the top and bottom of the kick plate. Standard kick plates are either 6 or 8 inches tall.

What doors need kick plate?

Kick plates are not necessary but they are a great feature to protect the surface of the door. It will not only protect the finish of your door from scuff marks and scratches but it gives the door an additional little design touch, just make sure to choose one that complements the design of your door.

Are kick plates popular?

Kick plates on residential homes have become increasingly popular as people’s lifestyles are becoming more fast-paced and demanding more efficiency.

What side of a door does a kick plate go on?

push side
A kick plate is installed at the bottom of the door on the push side and ranges in height from 8” to 16”. This style of protection plate is the most common form of commercial door protection.

Should I put a kick plate on my front door?

How do you make a kick plate for a door?

Steps:

  1. Measure the area of your door where you want to apply your kick plate.
  2. Mark and cut your aluminum sheet to size.
  3. Use a foam paint brush to apply your DAP Gel Contact Cement to the back of your aluminum sheet AND to the corresponding area on your door.

How do you fit a kick plate?

Place the kick plate on the bottom of the door. Use a tape measure to ensure you have 1-inch on either side and bottom and mark these measurements with a pencil. Line-up the kick plate with these measurements and mark the screw holes to ensure your drill holes will be in the correct position. Attach the kick plate.

What is the plate at the bottom of a door called?

The piece at the bottom of a door is called a sill. Door sills help prevent air and water from getting in your home.