Why is the link light blinking on my modem?

If the light is on, a link has been detected with a USB device. If the light is blinking, data is being transmitted through the USB. If the light is off, no USB link has been detected.

What do the flashing lights on my Motorola modem mean?

When the light is flashing, the modem is scanning for the network configuration server connection. A solid light indicates the connection is acquired. When the light is flashing, the modem is transmitting or receiving data. When the light is off, the modem is not transmitting or receiving data.

Why won’t my Motorola modem connect to the internet?

Check your cable modem’s Ethernet and coaxial cable connections. Make sure the coaxial cable is tightly connected. If a computer is plugged into an Ethernet port, make sure that the cable is plugged in all the way on both ends. If you are using wireless, check that your wireless connection is functioning correctly.

How do I know if my Motorola modem is bad?

5 Warning Signs Your Cable Modem is Dying

  1. Connection indicator lights have turned off even if you can still surf the web.
  2. Data transfers/downloads are slow.
  3. The connection speeds are slow.
  4. The modem is making a lot of loud or weird noises.
  5. The modem turns off or stops functioning.

What is the link button on a modem?

This button is the Wi-Fi Protected Setup button. Wi-Fi Protected Setup (WPS) is a simple way to connect to a wireless network without much configuration. With WPS, it will automatically configure a wireless network with a network name (SSID), WPA security key and authentication.

What color should lights be on Motorola modem?

If your modem’s connection to your cable provider is good (with the bonded DOCSIS 3.0), you should see two blue lights lit for both your send and receive lights. This is the basic light to show you that the modem is actually on. If it is not, check the outlet or any switches to make sure that your modem has power.

How do you reset a Motorola Surfboard?

Resetting the SB6141

  1. Disconnect the coaxial cable from the modem.
  2. Power cycle the modem by disconnecting the power cord for 10 seconds, then reconnect the power cord.
  3. Click the Configuration link on the top menu.
  4. Click the Reset All Defaults button (as shown below).

What do the lights mean on a Motorola Surfboard SB6141?

What do the lights on my SB6141 mean? Answer. The SB6141 front panel LED indicators provide the following status information for power, communications, and errors: During normal operation, the POWER, RECEIVE, SEND, and ONLINE lights are ON. The LINK light flashes when the cable modem is transferring data.