Why is the burner light flashing on my Ideal boiler?

When your boiler displays a ‘C’ on the boiler screen and the burner light is also flashing, this means your boiler has reached the programmed temperature. If your house has not met the set temperature and your boiler is showing this it could be caused by a circulation problem in the system.

Why is my gas boiler light flashing?

If the pilot light isn’t clear or keeps flickering it could be a sign that there isn’t enough oxygen in the system to power it. If the pilot light goes out completely, there could be a broken thermocouple stopping the supply of gas or a built up deposit behind the pilot light.

How do I fix a blinking red light on my boiler?

Depending on the type of boiler you have, a flashing red light could indicate a variety of errors, but often a flashing red light means there’s a failure in the ignition sequence. You can try to reset your boiler. If this doesn’t work, then it’s best to have a technician come out and check your system.

Why is my boiler flashing blue?

Low gas supply pressure Your boiler requires a steady gas supply at the right pressure. If the gas pressure is too low, it won’t be enough to sustain the flame needed to heat water. Once the flame goes missing, your gas boiler will quickly display an error code accompanied by the flashing blue light.

How do I reset my ideal Isar boiler?

Press select (reset) button (C) for greater than 3 seconds , the boiler should then re-light. If fault recurs this indicates an overheat condition. The boiler should be turned off and your installer contacted. Check if ALL radiators have thermostatic radiator valves fitted.

Why won’t my Ideal boiler fire up?

If the boiler is not igniting at all, faulty ignition leads are a likely cause. If the boiler is trying to ignite (so the ignition leads are working correctly), the sensors on the boiler may be the problem. Boilers have a flame and ignition sensor. Over the years, they can get carbon deposits and other debris on them.

How do I reset my Ideal boiler?

REsET PROCEDURE To reset boiler, turn the mode control knob (D) to reset position and immediately turn knob back to required setting. The boiler will repeat the ignition sequence. If the boiler still fails to light consult a Gas Safe Registered Engineer or in IE a Registered Gas Installer (RGII).

How do I reset my ideal boiler?

What does a flashing blue light indicate?

The flashing blue lights, officially referred to as “Tattle Tale Lights”, are usually positioned on or next to traffic lights and are designed to help traffic officers apprehend red light violators. Traditionally, when an officer sees someone run a red light they too then have to run the light to catch them.