Why is my water jug dispenser not working?

Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.

Why is my hot water dispenser not working?

Always check to ensure that there is proper power supply because a simple thing like a disconnection in power supply could be the reason why the dispenser is not working. Also, check if the socket is working and if there is power coming to the fuse, that is, the power supply could be your problem.

What are the parts of water dispenser?

Typically, a bottle water dispenser have the following parts:

  • A tank (or two)- to store the water to be heated or cooled prior to dispensing.
  • A water heater- to heat the water.
  • A refrigerating system- to cool the water.
  • A tap or spigot- to release water.
  • A button or knob- for users to dispense water.

Why is water not coming out of my water cooler?

If no water is flowing from your bottled water cooler or dispenser, there are generally two main causes: either the reservoir has become frozen, or the air filter is water-saturated due to a leaky bottle or dirty.

How do I reset my water cooler?

Option 3 – Try “resetting” your cooler by removing several cups of water from both the hot and cold taps and switch off the machine. Unplug it from the wall and leave for 24 hours before switching it on again. Give the water temperature about 5 to 6 hours to adjust before dispensing to see if it worked.

How do I get hot water to work on my water dispenser?

Many water coolers can heat water, too.

  1. Plug the water cooler into an electrical outlet.
  2. Place the water jug in its proper holding position.
  3. Locate the three buttons near the top of the unit that control the water temperature.
  4. Press the button under the green light.
  5. Press the button under the red light.

How do you fix a spigot water dispenser?

Remove the water bottle from the cooler if it is not empty. Remove the broken or cracked water cooler spout assembly by turning it counter-clockwise until it loosens and can be removed. Screw the new water cooler spout into the water cooler, gently turning the spout clockwise until it is tight.

Should I turn off water dispenser at night?

While each unit is designed to be left switched on 24/7 if you want them to be, it’s not energy-efficient to do so. To help you save money, you should switch the dispenser off at night to save electricity.