Why is my new Whirlpool refrigerator not getting cold?

Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.

How long does it take for a new Whirlpool refrigerator to get cold?

24 hours
If your Whirlpool refrigerator was recently installed it is recommended that you allow 24 hours for the refrigerator to achieve full functionality. This allows time for the Refrigerator to achieve the following: Correct Internal temperature. Properly chilled water.

Why is my brand new fridge not cold?

Check to make sure nothing is blocking the air vents. Depending on the brand and model of your fridge, the vents could be located along the inside back wall or along a side wall. Check your owner’s manual if you have trouble locating them. Items crammed tightly against a vent can block airflow.

How long do you have to wait before putting food in a new refrigerator?

To summarize, it takes at least two hours before you can put food in a new refrigerator. Before turning it on, make sure that the refrigerator has enough time to stand upright for the compressor oil to settle. Also, ensure you’ve reached the ideal temperature before placing food in the refrigerator.

How do I reset my Whirlpool refrigerator compressor?

4 steps to reset a refrigerator compressor

  1. Unplug your refrigerator.
  2. Turn off the refrigerator and freezer from the control panel.
  3. Reset your freezer and fridge temperature settings.
  4. Wait for the refrigerator temperature to stabilize.

Why is my fridge and freezer not getting cold enough?

Defrost system problems, dirty condenser coils, fan failures, leaky door gaskets or control problems can lead to your freezer not getting cold enough. Although you may see the cooling problem start in the freezer, you’ll typically soon find the refrigerator and freezer not cool enough.

Does a Whirlpool fridge have a reset button?

Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.

How do I turn the cooling back on my Whirlpool refrigerator?

Cooling Off Indicator Light – Refrigerator

  1. Press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds.
  2. Press and hold LOCK and MEASURED FILL for 3 seconds again to turn cooling back on.