Why is my gas meter not working?

Depending on the location of the fault, the fuel sender may not have a source voltage, the gas gauge may have no fuel sender voltage, or the ground for either one may be interrupted. Loose connections and corrosion can also cause problems, particularly at the Fuel Pump Module, which is usually exposed to the elements.

What do I do if my prepaid meter is not working?

Unplug the keypad and plug it into a different power outlet socket that is closer to the main distribution board. Unplug all the appliances near the keypad. Systematically disconnect other household appliances that are plugged in and switch on and see if any one of them is causing the problem (eg DSTV etc).

Why is my prepaid meter showing failed?

Reasons Why Prepaid Meter Is Rejecting Tokens When your meter number is wrong, it becomes impossible to load tokens on the meter. According to Abuja Electricity Distribution Company (AEDC), the inability for a meter to accept tokens may be due to wrong meter number when vending.

What is the B button on gas meter?

To read the meter: press the white B button – the screen will light up. wait until the screen says ‘meter boost’ – press ‘A’ to select ‘no’ and you should see numbers followed by ‘KWH’ write down the numbers from left to right.

Why is my gas meter blank?

If your gas meter screen is blank Your gas meter is battery powered so to save power the screen will be blank. To take a reading from your gas meter, press the round button between the two arrowed buttons and the reading will show on screen.

How do I know if my meter is faulty?

For an electricity meter, proceed as follows. Watch your meter for a few minutes without switching any lights or electric appliances on or off. If, while you’re watching it, you notice that the numbers on your meter are turning at an unusual or inconsistent speed, you probably have a faulty electricity meter.

Who is responsible for gas meter?

Gas meter boxes can be installed by the homeowner before the supplier installs the supply, or the gas supplier might install the meter box through some agreement with the consumer. However, once the meter box is installed it appears that the consumer (usually the property owner) is responsible for its maintenance.

What causes the meter box to be blank?

Why is my electricity meter blank? Meters can go into sleep mode and seem to have no display. Pressing a button on the main panel should revive the screen display. If you’re worried your meter is broken you need to get in contact with your energy provider and they’ll tell you what to do.

Why is my token not working?

When the Token is functioning properly, the green light should be blinking once every minute. If you see a red blinking light, or when there is no light, this means the Token is not working. You need to replace your Token if it is lost, faulty, damaged, or when the battery is low.

Why is my meter rejecting the token?

WHY DOES MY METER REJECT TOKENS? This may result from using the wrong meter number when vending, a faulty meter or change in tariff index. The customer is required to visit any of our nearest customer care units or contact us through our contact channels(helplines, social media & live chat) for immediate assistance.

Why is my meter token not working?

You haven’t activated your meter account Without this activation, you won’t be able to successfully load any token into your meter. So, to activate your meter, simply request for an activation code from your distribution company. Once you get this code, load it in the format given to you before loading your token.