Why is my caravan Mover not working?

Why is my caravan Mover not working?

The most likely cause and the first thing to check is if the leisure battery is flat. Motor movers require 12v electricity from the caravan’s leisure battery to power the rollers.

How do I reset my caravan motor Mover?

first make sure the rollers are disconnected from the tyres. remove 4 screws an the black cover and locate the setting button . press this setting button the red LED light will start flashing then switch on the hand set by simultaneously pressing and holding down the two red buttons (marked on) .

How to reset a truma motor Mover?

Press the reset button (k) on the control unit and hold down (red LED – j – flashes slowly), and after approx. 5 seconds the LED (j) starts to flash rapidly.

How do I reset my Quattro motor mover?

Press the Reset button (Fig. 3A), the green LED will flash for 10 seconds. Press the power button on the handset twice whilst the Control Unit’s LED is still flashing. The green LED will then be on without flashing.

Why does my motor mover keep cutting out?

Most movers will be sensitive to the ability of the battery to supply enough current to run them. If you battery is not well charged or is old and has some less than good cells, the mover may cut-out as the battery voltage drops under load.

How much does a Powrtouch motor mover weight?

. 35kg
Manufactured within the UK, The Powrtouch caravan mover is built to last and for your peace of mind provided with an Industry Leading, Unrivalled 5 Year Warranty….Soft start for ultimate control.

How does a manual motor mover work?

A motor mover is a manual or 12V motorised device which is clamped to a caravan chassis and connects to rollers attached to the caravan wheels which then propel the caravan in any chosen direction, controlled by a handset.