Why does my Phantom 3 lost signal?

Sometimes a quick re-linking or pairing of your quadcopter back to the remote controller will fix any rc signal losses. If you Phantom 3 and remote controller have been lying idle for any length of time especially on empty batteries, then you would need to pair the Phantom 3 and Remote Controller again.

How long does a Phantom 3 battery last?

Performance: With upgraded capacity 4480mAh, Our dji phantom 3 battery provides maximum 23 minutes’ flying time on a single charge. The actual time may vary influenced by other factors.

How do I reset my Phantom 3 drone?

Open the “DJI GO 4″ app on your computer device. Go to the top left corner of the screen and click on ‘Device’. Then click on ”Drone Reset”. A pop-up will appear now, which will give you different options to select from.

What is the range on a DJI Phantom 3 standard?

7. What is the range on my Phantom 3 Standard? The signal transmission distance will vary depending on environmental conditions and local regulations, but the Phantom 3 Standard can reach distances of up to 0.5 miles (1 kilometer) away from the pilot.

How many times can you charge a phantom 3 battery?

these batteries are meant to last up to 200 cycles. AFAIK the phantom 3 intelligent batteries will automatically prevent you from starting the phantom using the battery if its reached 200 cycles for the safety of the aircraft.

How do I wake up my DJI battery?

warloc59 Offline

  1. Plug in battery and hold the power button for 30 seconds.
  2. Unplug battery for just a couple seconds.
  3. Plug in battery and hold the power button for 30 seconds.
  4. Unplug battery for just a couple seconds.
  5. Plug in battery and hold the power button for 30 seconds.
  6. Unplug battery for just a couple seconds.

How do I reset my Phantom 3 battery?

To reset it, you need to have the DJI charger on hand. Press the ON button two times and ignore any of the lights that may flicker. Do not press any other button but let the battery rest for another 5 minutes and plug in the charger but don’t press any button this time around.