Why are my polylines hollow in AutoCAD?

for latest Autocad version, it because Z-axis of your polylines not at the same lavel. on older Autocad polyline we cannot draw polyline with different Z-axis so we don’t facing this problem. to know try explode your polyline to standard lines & check Z-axis properties of that line.

Why are my lines not thick in AutoCAD?

Change lineweight to the desired thickness On the ribbon in AutoCAD, click the Home tab Layers Panel Layer Properties. In the Layer Properties Manager, under the Lineweight column, click the lineweight to change. In the Lineweight dialog box, choose the lineweight to use as the default for objects on that layer.

How do you make a polyline solid?

Make the 2D lines, polylines, splines, and arcs into a single polyline:

  1. Click on the ‘Home’ tab and go to the ‘Modify’ panel.
  2. On the command line type M for ‘Multiple’ then select the polyline, spline, line, or arc to to be joined together and press ‘Enter’.

Why is polyline not filled?

Polylines are 2D objects. Fill cannot displayed if: The view orientation is not set to “Top” You are using a 3D visual style.

How do you solid fill an object in Autocad?

Here are the steps:

  1. First set the layer that you want to use for your solid fill.
  2. On the Home tab in the Draw panel, click Hatch.
  3. In the Pattern panel, choose Solid.
  4. If you have one closed area, you can just click inside it to pick an internal point.
  5. Press Enter to end the HATCH command.

How do I increase the thickness of a polyline in Autocad?

Adding Thickness to Polylines In order to add thickness to an existing polyline, select it from the drawing area and right-click and select Properties to invoke the Properties palette. From the General tab of the Properties palette, change the value of the thickness to the desired value.

How do you make a polyline thicker in AutoCAD?

In order to add thickness to an existing polyline, select it from the drawing area and right-click and select Properties to invoke the Properties palette. From the General tab of the Properties palette, change the value of the thickness to the desired value.

Why is solid hatch not showing in AutoCAD?

You need a closed polyline for the solid hatch to work. You can also solid hatch an area bounded by plain lines and arcs, but unlike other CAD software AutoCAD requires that the ends of adjoining lines *must* be located precisely at the same point.

How do you create an outline in AutoCAD?

To Create a Boundary Polyline

  1. Click Home tab Draw panel Boundary.
  2. In the Boundary Creation dialog box, in the Object Type list, select Polyline.
  3. Under Boundary Set, do one of the following:
  4. Click Pick Points.
  5. Specify points within each area to form a boundary polyline.

https://www.youtube.com/watch?v=w256eP4pb3c